Sharp VL-Z1U warranty Gain-up, To cancel the gain-up function

Gain-up

When you are recording in a dark or poorly illuminated location, “LIGHT” is displayed on the screen. Use the gain-up function to record a brighter picture.

Note:

•At locations where lighting is adequate, “LIGHT” will not appear. The gain-up function cannot be used in this case.

1 In Camera mode, press the DISPLAY button until the mode screen appears.

B L C / G A I N	O F F
F A D E
M E N U
S C E N E M E N U

2 Press l or m on the Operation button to select “BLC/GAIN”, then press the center of the Operation button.

3 Press l or m to select “ON e”, then press the center of the Operation button.

B LC / G A I N ON

4 Press the DISPLAY button to turn off the mode screen.

•“e” appears when on-screen indicators are turned on, indicating that the gain-up function is now working.

To cancel the gain-up function

Select “OFF” in step 3 above.

Notes:

•You may experience some picture noise in Gain-up mode, which increases when the e appears.

•When the e indicator appears, you may get a shadow image behind a subject that is moving around a lot.

•Fine brightness adjustments are possible when using manual iris (see page 50).

•The e indicator will disappear and Gain-up mode will cancel if you aim the camcorder in a bright location.

Useful Features

A U T O

3 0 min

31