Manual Exposure
The VIEWCAM is preset to Auto Exposure mode, which automatically chooses the optimal aperture. When there is too much contrast in brightness between the subject and background, however, you may not be able to record a clear image. In this case, use the manual exposure function to correct the exposure level.
Background is too bright and subject too dark (backlit subject).
•Increase the exposure level to allow more light through the lens.
Subject is too bright against background.
•Decrease the exposure level to allow less light through the lens.
1 In Recording Standby mode, press the MENU button until
appears.
3 Press the or button to select the desired exposure level.
•The bar indicates the selected exposure level.
E X POSURE
AUTO E X I T
E X POSURE
Less light 
More light
4 Press the EXIT button (A) to turn off the exposure setting screen.
To cancel Manual Exposure mode
Perform steps 1 and 2 above, then press the AUTO button (B).
Notes:
•The Manual Exposure mode will be canceled if the power source is interrupted.
•The Manual Exposure mode will be canceled if a scene setting is selected thereafter.
|
|
|
|
|
| WH I T E |
| E XPO |
|
|
|
|
|
|
| ||
|
| F OCUS |
|
|
| BA L . |
| SUR E |
|
|
|
2 Press the EXPOSURE button (
) to display the exposure setting screen.
EXPO
SURE
E X POSURE
AUTO E X I T
Advanced Features
46