Sharp VL-AH130U Demonstration Mode, Watching the Demonstration, Canceling Demo Mode

Demonstration Mode

You can watch a brief demonstration of the special VIEWCAM features in Demo mode. If the demonstration appears on the screen when you turn on the VIEWCAM for the first time, cancel the Demo mode to use your

VIEWCAM.

Power switch

MENU button

Operation buttons

Watching the Demonstration

1 Make sure that there is no video cassette in the VIEWCAM.

•If a cassette is in the VIEWCAM, Demo mode does not work. Perform the procedure on page 10 to remove it.

2 Hold down the Lock	Lock button
button and slide the
Power switch to
CAMERA.

Canceling Demo Mode

1 During the demonstration, perform step

3 above.

2 Press or button (Q) to select “DEMO MODE”, then press the SET button (B) (W) to select “OFF”.

	MENU	1
S E T	F ADE	NORMAL
	REMOT E	AUTO
		ON
	DEMO MODE	O F F
	L ANGUA G E

3 Press the DISPLAY button to turn off the menu screen.

Note:

•The demonstration will stop if you press the MENU button. If you leave it for 60 seconds, or turn the power off temporarily and then set the Power switch to CAMERA, the demonstration will begin again.

3 Press the MENU button until appears.

• If MENU 2 appears on the screen, press the PAGE button () to display MENU 1.

4 Press or (C or D) button (Q) to select “DEMO MODE”, then press the SET button (B) (W) to select “ON”.

•The demonstration begins.

	MENU	1
S E T	F ADE	NORMAL
	REMOT E	AUTO
		ON
	DEMO MODE	ON
	L ANGUA G E

References

54