Toshiba IK-WR01A operation manual Ram

Installation/Set up and OperationViewing

Recording

Setting up

Others

Before Calling Service Personnel... (Cont.)

Symptom	Cause	How to Manage
No images are	●The iris of your lens is	●Adjust the iris of your lens properly.
displayed.	not adjusted properly.
	●Any of the cables are not	●Connect the cable properly.
	connected properly.
The colors of	●The video monitor is not	●Adjust the video monitor properly.
images are poor.	adjusted properly.
	●Lightings are dim.	●Brighten the lightings.
Cannot display	●The Internet line is busy.	●Wait for a little while. Sometimes it takes time to display
images from the		images.
network camera.
	●There are not enough	●There are the recommended requirements of PC to
	resources (CPU power,	view the images of the network camera.
	RAM).	(→ page 20)
		●Close all applications other than the network camera
		browser.
Renewal speed	●Picture size is too large.	●The default setting of picture size is QVGA(320x240).
of network		To increase the speed, select a small image size in
camera images		“Resolution” of “Camera Window.”
is too slow.
(Part 1)	●Picture quality is too	●When you lower the image quality in “Quality” of
	high.	“Camera Window,” the renewal speed becomes faster;
		however, the picture quality becomes poor.
Renewal speed	●More than one users are	●When many users access to the camera at the same
of network	accessing the camera at	time, the renewal speed of the image becomes slow.
camera images	the same time.
is too slow.
(Part 2)
The network	●Installed the camera in	●Make sure that the camera is installed in right way.
camera images	wrong way.	Adjust the setting to place the “Toshiba” logo in the
are reversed in		right direction.
upside-down.

86