Toshiba CS3950D specifications Before USE General Safety Instructions

Page 2

BEFORE USE - GENERAL SAFETY INSTRUCTIONS

This instruction manual contains important information for the operator (user) and/or people around him/her to avoid personal injuries, or property damages against him/her or people around him/her by using this product correctly.

Prior to use, read this operation manual carefully to fully understand its instructions for correct use.

After reading, keep this manual by the side of your equipment for your future reference.

WARNINGS & CAUTIONS

[Definition of markings]

The meaning of each mark used in this instruction manual is given below.

This mark warns the user that improper use, indicated with this mark,

DANGER may cause death or severe personal injuries against the user or people around him/her.

This mark warns the user that improper use, indicated with this mark,

CAUTION may cause personal injuries (*1) or material damages (*2) against the user or people around him/her.

Notes

*1 : Personal injuries mean wounds, burns, electric shocks, and others for which the person injured need not to be hospitalized nor to be cared for the long term.

*2 : Material damages mean any direct or consequential damages related to property or material loss.

This mark indicates what the user SHOULD NOT DO. The details of things which the user should not do are described next to this mark.

This mark indicates what the user MUST DO. The details of things which the user must do are described next to this mark.

This mark indicates that the user must be alert against a possible DANGER. The details of the danger which the user must be aware of are described next to this mark.

This mark indicates that the user are given a CAUTION against possible hazards. The details of the caution which the user must be aware of are described next to this mark.

i

D4133738B

Image 2
Contents CCD Camera CS3950D Specification Before USE General Safety Instructions Do not supply any power other than specified Device for repair service/technical adviceThis device for repair service Do not disassemble this deviceUnplug the power-plug when the your device is not in use Do not damage the power cordPurchased this device for repair service Do not attempt to make connection before turning power offRestriction for USE Discramer Rimited WarrantyAvoid irregular signal interface Other Instructions Product Description FeaturesConfiguration Nega Operation ModeOption Unit Trig Supply consecutive HD CCDUnder other shutter modes 35H 137H 21H Input level From 2 through 4V p-p Input impedance SpecificationsInitial factory setting High 2SC3734 Switching via rear-panel DIP SWInitial factory setting Rising edge 100 2SA1461Shutter Normal Temperature From 0 through 40 C Mechanical spec External dimensionWeight Approximately 130g Lens mount Mount GND / insulation Operation guaranteed Temperature From -5 through 50 CConnector pin assignment Compatible connector Pin assignmentSwitch setting CCU rear-panel DIP SW Set No.9 OFF when Trig in OpenOptical black characteristics Timing Chart 1H rate timingExt. VD Ext. HD phase difference Rate timingEXTERNAL-VIEW Drawing Design and specification is subject to change without notice