Toshiba CS3950D Electric shock accident, Do not damage the power cord, Down, Degraded

		DANGER
	Do NOT place any potentially-hazardous things on this device.
	Do NOT place any things on the device which may, if it gets into the inside of the
	body, damage the inner parts of the device (such as a flower pot, glass, cosmetics, a
	container filled with liquids or chemicals, as well as small metal parts, etc.). If
Avoid	tumbled, the liquids inside the bottle, etc. may get into the chassis, causing a fire or an
	electric shock accident.
	Do NOT damage the power cord.
	Do NOT damage, break, re-process, nor bend forcefully the power cord. Pulling
	forcefully/Twisting/Placing a heavy object on/Applying heat on the cord should also
	be avoided. Otherwise, the cord may be damaged, causing a fire or an electric shock
Avoid	accident. If the cord is damaged, contact us or our dealer/distributor from which you
	purchased this device for repair service.

CAUTION

	Unplug the power-plug when the your device is not in use.
	For safety, make sure to unplug the power-plug before you give your device a
	cleanup, or when it is not used. Keeping the power-cord connected might invite a fire
Unplug	or an electric shock hazard.
	Do NOT expose your device to direct sunlight, nor intensive heat.
	Do NOT place this device where it is exposed to direct sunlight, or in a high
	temperature condition. To do so may cause the inner temperature of the device to go
Avoid	up, resulting in burning-down of inner parts, circuits or a fire accident.
	Do NOT connect/disconnect connectors before turning power off.
	Make sure to check the camera power is OFF before connecting/disconnecting
	connectors. Otherwise, you might get an electric shock, or your camera might break
Avoid	down.
	Do NOT attempt to make connection before turning power off
	Make sure to check the camera power is OFF before connection. Otherwise, you
	might get an electric shock.
Avoid
	Do NOT pull the cord itself
	When disconnecting the power-plug out of the outlet, make sure to hold the plug,
	and then pull it out. Do NEVER try to pull the cord itself. Otherwise, the cord may
Avoid	be damaged or broken, leading to a fire or an electric shock accident.
	Do NOT place your device too close to a heater.
	Do NOT place your device or its power cord too close to any heating appliance.
	Otherwise, the coating of its switch and/or power-cord may melt, leading to a fire or
Avoid	an electric shock accident.
	Do NOT use chemical solvent for cleanup.
	When giving your camera a cleanup, avoid using a benzene, alcohol, and thinner.
	These chemicals might cause its coating or markings to come off or become
Avoid
	degraded.
	Do NOT handle the power cord with your hand in an wet condition.
	Do NOT plug in/out the power cord with an wet hand. Otherwise, it may cause an
	electric shock accident.
Avoid
	D4133738B
	iii