Toshiba IK-DF02A instruction manual Ceiling

Page 15

(iii) Mounting the Camera to a Switch Box Attached to a Ceiling

Ceiling

(i)

1. Position the cover to conceal the unlock-button from the visible side.

2. Use the mounting holes (i) or (ii) depending on the direction of the switch box.

(Refer to section 5-1-3 (i) or (ii).)

3. Attach the camera to the switch box with the four mounting screws.

Note: Verify that the word "TOSHIBA" is on the visible side.

Mounting Screw x 4

(ii)

(not supplied)

 

- 14 -

Image 15 Contents
Dome Camera Table of ContentsImportant Safeguards Page Disclaimer Components Features and DescriptionPan ADJ Screw Part Names and FunctionsConnections Basic connection single system configurationLine lock Control OFFInstallation Installing the CameraCover Removal with the Tamper Resistant Feature Enabled To Determine Which Set of Mounting Holes to Use Mounting HolesInstallation to a Wall or Ceiling Ii Notching Out a Hole for the Wires Mounting Screw x Not supplied Ii Mounting the Camera to a Switch Box Positioned Sideways Ceiling Adjusting the Viewing Angle Backlight Compensation BLC Line Lock PhaseDo not shoot intense light Keep the camera installation away from video noiseCheck the ambient temperature and humidity Do not aim the camera at the sunCondition Check Points Case of ProblemsOn / OFF DIP-SW SpecificationsExterior View Wall Memo Limited Warranty
Related manuals
Manual 24 pages 63.15 Kb Manual 2 pages 60.41 Kb