![](/images/new-backgrounds/1291973/29197319x1.webp)
To Determine Which Set of Mounting Holes to Use
There are two different sets of mounting holes (i and ii).
The set to use depends if the camera is being mounted to a switch box or not and to a wall or ceiling.
Note: When determining the orientation of the switch box take into consideration the viewing angle of the
Mounting Holes (i)
¥Installation to a wall or ceiling. (Refer to section
¥Installation to a switch box
positioned normally on a wall. | Upside |
(Refer to section |
|
¥Installation to a switch box attached to a ceiling.
(Refer to section
TOP mark
This mark is supposed to be upside.
Wire Hole
Mounting Holes (ii)
¥Installation to a switch box positioned sideways on a wall. (Refer to section
¥Installation to a switch box attached to a ceiling. (Refer to section
- 9 -