Toshiba IK-DF02A instruction manual Features and Description, Components

Page 5

1.FEATURES AND DESCRIPTION

1.24V AC/12V DC dual-voltage capability extends power options.

2.Camera has the ability to automatically switch to color in daylight or black and white at night.

3.Camera synchronization mode is selectable between internal and line lock.

4.Back Light Compensation (BLC) adjusts for strong backlight conditions.

5.White balance is automatically adjusted depending on color temperature variations (AWB).

6.Built-in varifocal lens with auto-iris. Focal length 2.8 ~ 10 mm.

7.Built-in 1/3 inch high resolution CCD.

8.Minimum illumination of 0.5 lux with smoke cover.

9.S/N ratio of 50dB.

2.COMPONENTS

(1)

Camera

1

(2)

Accessories

 

 

(a) Instruction Manual

1

 

(b) Screws

4

 

(c) Monitor Out Harness Wire

1

 

(d) Instruction (Tamper Resistant)

1

 

(e) Wire Tie

2

- 4 -

Image 5 Contents
Dome Camera Table of ContentsImportant Safeguards Page Disclaimer Components Features and DescriptionPan ADJ Screw Part Names and FunctionsConnections Basic connection single system configurationLine lock Control OFFCover Removal with the Tamper Resistant Feature Enabled InstallationInstalling the Camera To Determine Which Set of Mounting Holes to Use Mounting HolesInstallation to a Wall or Ceiling Ii Notching Out a Hole for the Wires Mounting Screw x Not supplied Ii Mounting the Camera to a Switch Box Positioned Sideways Ceiling Adjusting the Viewing Angle Backlight Compensation BLC Line Lock PhaseCheck the ambient temperature and humidity Keep the camera installation away from video noiseDo not aim the camera at the sun Do not shoot intense lightCondition Check Points Case of ProblemsOn / OFF DIP-SW SpecificationsExterior View Wall Memo Limited Warranty
Related manuals
Manual 24 pages 63.15 Kb Manual 2 pages 60.41 Kb