Toshiba IK-DF02A instruction manual Case of Problems, Condition Check Points

Page 19

9. IN CASE OF PROBLEMS

Condition

Check Points

 

 

No image

¥ Are the camera and connected equipment turned on?

 

¥ Is the mode setting switch DC/AES set to OFF?

 

Be sure to set to ON.

 

¥ Are wires connected correctly?

 

 

Unnatural color

¥ Is the display monitor adjusted correctly?

 

¥ Is the lighting too dim?

 

 

The image is out of

¥ Is the lens focus adjusted?

focus.

¥ Is the lens or cover dirty?

The image is dark.

¥ Are there any large barrier or bright illumination near the

 

camera?

 

¥ Is the iris of lens adjustment volume correctly set?

 

 

- 18 -

Image 19
Contents Dome Camera Table of ContentsImportant Safeguards Page Disclaimer Components Features and DescriptionPan ADJ Screw Part Names and FunctionsConnections Basic connection single system configurationLine lock Control OFFInstalling the Camera InstallationCover Removal with the Tamper Resistant Feature Enabled To Determine Which Set of Mounting Holes to Use Mounting HolesInstallation to a Wall or Ceiling Ii Notching Out a Hole for the Wires Mounting Screw x Not supplied Ii Mounting the Camera to a Switch Box Positioned Sideways Ceiling Adjusting the Viewing Angle Backlight Compensation BLC Line Lock PhaseDo not shoot intense light Keep the camera installation away from video noiseCheck the ambient temperature and humidity Do not aim the camera at the sunCondition Check Points Case of ProblemsOn / OFF DIP-SW SpecificationsExterior View Wall Memo Limited Warranty
Related manuals
Manual 2 pages 60.41 Kb