Samsung SDN-550 White Balance control, Please select one of the 3 modes below, Spotlight

Page 14

Operating Your Camera

WHITE BALANCE control

The screen color can be adjusted by using the WHITE BALANCE function.

1.Please position the arrow to point to 'WHITE BAL' on the SETUP menu by using the UP and DOWN buttons.

2.Please select the mode you wish to operate by pressing the LEFT or RIGHT button.

SETUP

1.LENS DC

SHUTTER - - -

3.WHITE BAL. ATW

Please select one of the 3 modes below.

ATW(Auto Tracking White Balance) : This mode can be used within the color temperature range 1,800˚K ~ 10,500˚K (Ex. fluorescent light, outdoor, sodium

BACKLIGHT (Backlight Compensation)

When there is a strong backlight behind the object, clear images of the background as well as the object can still be obtained by using the BACKLIGHT function.

1.Please position the arrow to point to 'BACKLIGHT' on the SETUP menu by using the UP and DOWN buttons.

2.Please select the mode you wish to operate by pressing the LEFT or RIGHT button.

SETUP

1.LENS DC

2.SHUTTER ---

3.WHITE BAL. ATW 4.BACKLIGHT OFF

vapor lamp or inside tunnels)

AWC(Auto White Balance Control) : Please press the SETUP button while the camera is directed at a piece of white paper to obtain the optimum state under current illumination. If the environment including the light source is changed, you have to adjust the white balance again.

MANUAL: The manual adjustment mode enables finer adjustment. Please select ATW or AWC first. Please change to manual adjustment mode and press the SETUP button. Please set the appropriate color temperature, and then increase or decrease the red and blue color values while monitoring the color changes on the object.

Note

Under the following conditions the WHITE BALANCE function may not operate properly. In such cases, please select the AWC mode.

1.When the object’s surroundings have a very high color temperature. (Ex. a clear sky and sunset)

2.When the object’s surroundings are dark

3.If the camera directly faces a fluorescent light or is installed in a place where there are considerable changes in illumination, the WHITE BALANCE function may become unstable.

SPOTLIGHT :

When the SPOT LIGHT is illuminated under the restricted area such as entrance of the APT parking lot or gas station, it exposes the number plate of the automobile accurately and the efficient watch does to be possible.

Day Mode: The BLC function accomplishes by SPOTLIGHT window which was set in standard.

B/W Mode: If both sides of the SPOTLIGHT window be thrown bright light, monitor screen showed up the SPOTLIGHT window.It is possible to a subject in the center of the image exposed correctly.

Note

Under ordinary circumstances, "SPOTLIGHT" may not be operated unstably.

INCIDENT SPOTLIGHT

SPOTLIGHT WINDOW

< SPOTLIGHT ON >

COLOR CCD CAMERA 26 User’s Manual

COLOR CCD CAMERA 27 User’s Manual

Image 14 Samsung SDN-550 White Balance control, Please select one of the 3 modes below, Backlight Backlight Compensation, Spotlight
Contents 24/7 Sharp Eye Model Description SDN-550 SeriesSDN-550N SDN-550P SDN-550XContents DAY & Night FeaturesCamera needs periodic maintenance Precautions Do not install in high humidity environmentCCD protection cap Back Focus adjustment leverOverview Mount lens adaptorMounting bracket screw hole Auto iris lens connectorThis is the connection terminal for the auto iris lens Lights up when the correct power is supplied to the camera InstallationWhen using an auto iris lens Connects to the power appropriate to each modelIt in clockwise When using a C-Mount lensWhen using a CS-Mount lens Please take off the CCD protection cap and C-mount adaptorAC/DC Power Type Connecting to MonitorConnecting to Power ConnectionMDMotion Detection output signal levelless than 10mA Connection to External Control ConnectorMenu Setup menu DAY&NIGHT input control signalSettings Auto or manual control can be selected Lens selectionShutter condition and speed control FLKBacklight Backlight Compensation White Balance controlPlease select one of the 3 modes below Vapor lamp or inside tunnelsAGC Auto Gain Control Ssnr Samsung Super Noise reductionSens UP Low illuminance SpecialIf the wrong name has been input You can adjust the desired phase from 0 to Switched to the appropriate mode forColor Color mode Please select on mode for the chosen areaSaves all the setting menus and then exits MirrorTroubleshooting Problem SolutionSpecifications SDN-550PH