Samsung SDN-550 user manual Precautions, Do not install in high humidity environment

Page 5

Precautions

Do not install under extreme temperature conditions.

Do not install in high humidity environment.

Do not drop the camera or subject it to physical shock.

Never keep the camera face to strong light directly.

Use only under temperature conditions

May lower image quality.

between -10˚C and +50˚C. Provide good

 

ventilation when using in high temperature

 

conditions.

 

Do not install under unstable

Avoid touching the camera lens.

lighting conditions.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

May cause a product malfunction.

May damage the CCD.

 

 

 

 

 

 

 

 

 

 

Do not expose the camera to

 

Do not expose the camera to

 

rain or other types of liquids.

 

radioactivity.

Wipe dry any liquids. Liquids may contain minerals that are corrosive to electronic components.

Notes

Radioactivity exposure may damage the CCD.

Severe lighting changes or flickering may

The lens is the most important component

hinder normal camera operation.

of the camera. Be careful not to smear it

 

with fingerprints.

COLOR CCD CAMERA 8

User’s Manual

Exposure to a spotlight or an object emitting strong light may cause smear or blooming.

Ensure that the power source complies with normal specifications before supplying it to the camera.

COLOR CCD CAMERA 9 User’s Manual

Image 5
Contents 24/7 Sharp Eye SDN-550N SDN-550P SDN-550 SeriesModel Description SDN-550XContents DAY & Night FeaturesCamera needs periodic maintenance Do not install in high humidity environment PrecautionsOverview Back Focus adjustment leverCCD protection cap Mount lens adaptorMounting bracket screw hole Auto iris lens connectorThis is the connection terminal for the auto iris lens When using an auto iris lens InstallationLights up when the correct power is supplied to the camera Connects to the power appropriate to each modelWhen using a CS-Mount lens When using a C-Mount lensIt in clockwise Please take off the CCD protection cap and C-mount adaptorConnecting to Power Connecting to MonitorAC/DC Power Type ConnectionMenu Setup menu Connection to External Control ConnectorMDMotion Detection output signal levelless than 10mA DAY&NIGHT input control signalSettings Shutter condition and speed control Lens selectionAuto or manual control can be selected FLKPlease select one of the 3 modes below White Balance controlBacklight Backlight Compensation Vapor lamp or inside tunnelsSsnr Samsung Super Noise reduction AGC Auto Gain ControlSpecial Sens UP Low illuminanceIf the wrong name has been input Color Color mode Switched to the appropriate mode forYou can adjust the desired phase from 0 to Please select on mode for the chosen areaMirror Saves all the setting menus and then exitsProblem Solution TroubleshootingSDN-550PH Specifications