Samsung SDN-550 user manual AGC Auto Gain Control, Ssnr Samsung Super Noise reduction

Page 15

Operating Your Camera

HIGH/MIDDLE/LOW : You can adjust the sensitivity of Backlight Compensation. OFF BACKLIGHT function does not operate.

BACKLIGHT ON

BACKLIGHT OFF

AGC (Auto Gain Control)

1.Please position the arrow to point to 'AGC' on the SETUP menu by using the UP and DOWN buttons.

2.Please select the mode you wish to operate by pressing the LEFT or RIGHT button. As the level of gain increases, the screen gets brighter and the level of noise also increases.

HIGH : The gain increases or decreases within the range of 6dB ~ 34dB.

NORMAL : The gain increases or decreases within the range of 6dB ~ 30dB.

OFF : The gain is fixed at 6dB.

SETUP

1.LENS

DC

2.SHUTTER

- - -

3.WHITE BAL.

ATW

4.BACKLIGHT

OFF

5.AGC

NORMAL

6.SSNR

LOW

7.SENS-UP

OFF

8.SPECIAL

 

9.EXIT

 

COLOR CCD CAMERA 28

User’s Manual

3.Please press the SETUP button. The BRIGHTNESS can be adjusted within the range of 1~70.

4. Please press the SETUP button when all the settings are complete.

SSNR (Samsung Super Noise reduction)

The background noise in the low light level decreases automatically as the level of gain changes.

1.Please position the arrow to point to 'SSNR' on the SETUP menu by using the UP and DOWN buttons.

2.Please select the mode you wish to operate by pressing the LEFT or RIGHT button.

SETUP

1.LENS DC

2.SHUTTER ---

3.WHITE BAL. ATW

4.BACKLIGHT OFF

5.AGC NORMAL

6.SSNR LOW

OFF : There is no reduction in noise level.

LOW : There is a small reduction in noise level with almost no ghost image.

MIDDLE : The most effective mode. There is a sufficient reduction in noise levels without causing much ghost imaging.

HIGH : The level of noise is reduced greatly, however there is an increase in ghost imaging.

Note

• When AGC is turned off, SSNR does not operate.

COLOR CCD CAMERA 29 User’s Manual

Image 15 Samsung SDN-550 user manual AGC Auto Gain Control, Ssnr Samsung Super Noise reduction
Contents 24/7 Sharp Eye SDN-550X SDN-550 SeriesSDN-550N SDN-550P Model DescriptionContents Features Camera needs periodic maintenanceDAY & Night Do not install in high humidity environment PrecautionsMount lens adaptor Back Focus adjustment leverOverview CCD protection capAuto iris lens connector This is the connection terminal for the auto iris lensMounting bracket screw hole Connects to the power appropriate to each model InstallationWhen using an auto iris lens Lights up when the correct power is supplied to the cameraPlease take off the CCD protection cap and C-mount adaptor When using a C-Mount lensWhen using a CS-Mount lens It in clockwiseConnection Connecting to MonitorConnecting to Power AC/DC Power TypeDAY&NIGHT input control signal Connection to External Control ConnectorMenu Setup menu MDMotion Detection output signal levelless than 10mASettings FLK Lens selectionShutter condition and speed control Auto or manual control can be selectedVapor lamp or inside tunnels White Balance controlPlease select one of the 3 modes below Backlight Backlight CompensationSsnr Samsung Super Noise reduction AGC Auto Gain ControlSpecial Sens UP Low illuminanceIf the wrong name has been input Please select on mode for the chosen area Switched to the appropriate mode forColor Color mode You can adjust the desired phase from 0 toMirror Saves all the setting menus and then exitsProblem Solution TroubleshootingSDN-550PH Specifications