Samsung SDN-550 Auto iris lens connector, This is the connection terminal for the auto iris lens

Page 7

SIDE

DAY

& NIGHT

Auto iris lens connector

Please use the screw hole when fixing the camera onto the mounting bracket. Please use the clamp screw as specified below.

*The mounting bracket can be separated and attached to the top of the camera. In this instance please do not

tighten the screw to a depth of more than 4mm, otherwise serious damage can occur to the inside of the camera.

1/4"-20 UNC (20 THREAD)

L:4.5mm±0.2mm (ISO

standard),

COLOR CCD CAMERA 12 User’s Manual

Note

•This camera package does not include the mounting bracket. Please refer to the user's manual for installation of the mounting bracket.

COLOR CCD CAMERA 13 User’s Manual

Image 7

Contents 24/7 Sharp Eye SDN-550X SDN-550 SeriesSDN-550N SDN-550P Model DescriptionContents Camera needs periodic maintenance FeaturesDAY & Night Do not install in high humidity environment PrecautionsMount lens adaptor Back Focus adjustment leverOverview CCD protection capThis is the connection terminal for the auto iris lens Auto iris lens connectorMounting bracket screw hole Connects to the power appropriate to each model InstallationWhen using an auto iris lens Lights up when the correct power is supplied to the cameraPlease take off the CCD protection cap and C-mount adaptor When using a C-Mount lensWhen using a CS-Mount lens It in clockwiseConnection Connecting to MonitorConnecting to Power AC/DC Power TypeDAY&NIGHT input control signal Connection to External Control ConnectorMenu Setup menu MDMotion Detection output signal levelless than 10mASettings FLK Lens selectionShutter condition and speed control Auto or manual control can be selectedVapor lamp or inside tunnels White Balance controlPlease select one of the 3 modes below Backlight Backlight CompensationSsnr Samsung Super Noise reduction AGC Auto Gain ControlSpecial Sens UP Low illuminanceIf the wrong name has been input Please select on mode for the chosen area Switched to the appropriate mode forColor Color mode You can adjust the desired phase from 0 toMirror Saves all the setting menus and then exitsProblem Solution TroubleshootingSDN-550PH Specifications