Samsung SDZ-300 instruction manual High, Middle, Low, Off

Page 17

Operating Your Camera

•A.FLK (NTSC: 1/100, PAL: 1/120): Flicker-free mode

•ESC: Automatic shutter speed setting (optimal)

•MANUAL: Manual shutter speed setting

2.If you choose ‘MANUAL’, select the optimal shutter speed.

·In MANUAL mode, the optimal shutter speed needs to be designated. Select from 1/60 to 1/120,000 (NTSC) or from 1/50 to 1/120,000 (PAL).

*'Sens-Up' mode can be configured manually (2x to 128x).

·Verify changes made to the shutter speed by referencing to changes in on screen brightness.

3. Press the SET button to complete.

Notes

Image may become unstable if the camera is set to 'ESC' mode and faces a strong fluorescent light.

Under 'ESC' mode, the brightness can be adjusted using the LEFT or RIGHT button.

The WDR feature is not available under MANUAL mode.

Sens-up is disabled under 'MANUAL' or 'A.FLK' mode.

COLOR CCD CAMERA 32 User’s Manual

AGC (Auto Gain Control): For brighter images.

1.Position the indicator over 'AGC' using the UP or DOWN button.

2.Set 'AGC' to the desired mode using the LEFT or RIGHT button.

•HIGH

: Wide range gain value adjustment

•MIDDLE

: Middle range gain value adjustment

•LOW

: Narrow range gain value adjustment

•OFF

: Disabled

 

 

EXPOSURE

SETUP

 

BRIGHTNESS

50

 

IRIS

AUTO

 

SHUTTER

---

 

AGC

MIDDLE

 

SSNR

MIDDLE

SSNR(Samsung Super Noise Reduction): On screen noise reduction.

1.Position the indicator over 'SSNR' using the UP or DOWN button.

2.Set 'SSNR' to the desired mode using the LEFT or RIGHT button.

•LOW

: Low noise reduction

•MIDDLE : Medium noise reduction

•HIGH

: High noise reduction

•OFF

: Disabled

EXPOSURE

SETUP

BRIGHTNESS

50

IRIS

AUTO

SHUTTER

---

AGC

MIDDLE

SSNR

MIDDLE

SENS-UP

AUTO

COLOR CCD CAMERA 33

User’s Manual

Image 17
Contents Sales Network About this manualCorrect Disposal of This Product Features Contents Do not install in high humidity environment PrecautionsTop OverviewTripod Mounting Bracket Screw Hole Used to fix tripod mounting bracket on top of the cameraKey Buttons Bottom BackTripod Mounting Hole To see a far object clearlyConnection Connecting to MonitorConnecting to Power Function Connecting to connectionZoom FocusMenu Setup Menu ConfigurationOperating Your Camera Use the six buttons on back of the cameraCorrecting Mistakes Cam TitleSet White BAL using the Left or Right button When completed, move the cursor to END and press SET buttonWhite Balance Control Three white balance control modes are as followsBacklight Tips on Using the Motion Detection FeatureMotion Detection On Any motion in the selected areas is observedCan be manually adjusted, independent of moving zoom ONE Push Focus is automatically adjusted just oncePress the SET button Moving zoomFast To move zoom fast END To revert to the main setup menuAuto The iris is automatically activated upon illumination Shutter Control image brightness by adjusting shutter speedPress the SET button to confirm Middle HighLOW OFFUser Preset OFF DisabledEND Revert to the Special Setup menu Preset Clear Clear configured presetTOP Area SELBottom LeftTo finish setup menu To reset your camera to factory default conditionCAM ID Assign an ID number to the camera 1 to RET PKT Used to transfer a packetTroubleshooting SDZ-300PD SpecificationsFocus Far ResetFocus Near Zoom WideOSD Menu On/Off OSD Menu Down OSD Menu UpOSD Menu Left OSD Menu RightSignature Full Name 89 / 336 / EEC Manufacturers Name Manufacturers AddressPosition PlaceMemo