Samsung SDZ-300 Bottom Back, Key Buttons, Tripod Mounting Hole, To see a far object clearly

Page 7

Overview

Bottom

Back

Key Buttons

· Following buttons control zoom, focus, and auto focus functions.

Tripod Mounting Hole

Used to install the camera on an optional tripod. The tripod must be equipped with screws with specifications shown on the right.

L

1/4"-20 UNC (20 THREAD)

L:4.5mm±0.2mm (ISO standard),

or 0.197" (ASA standard)

WIDE button

: To widen the view. (ZOOM OUT)

TELE button

: To close in on a far object. (ZOOM IN)

F-NEAR button : To see a near object clearly.

F-FAR button

: To see a far object clearly.

AF button

: To activate auto focus just once.

Pressing the 'SET' button locks the zoom control function of these buttons and prompts the main setup menu.

Notes

• The zoom postion is saved after 5 seconds when you set zoom function.

Attach the bracket to the top of the camera. Use screws included in the package or their equivalent (less than 6mm). Otherwise, the bracket may not assemble to the camera properly.

COLOR CCD CAMERA 12 User’s Manual

·Main setup menu can be navigated using these buttons. SET : To access the main setup menu.

UP (WIDE button)

: To move the arrow indicator to up.

DOWN (TELE button)

: To move the arrow indicator to down.

LEFT (F-NEAR button)

: To move the arrow indicator to left.

RIGHT (F-FAR button)

: To move the arrow indicator to right.

 

COLOR CCD CAMERA 13 User’s Manual

Image 7
Contents Sales Network About this manualCorrect Disposal of This Product Features Contents Do not install in high humidity environment PrecautionsUsed to fix tripod mounting bracket on top of the camera OverviewTop Tripod Mounting Bracket Screw HoleTo see a far object clearly Bottom BackKey Buttons Tripod Mounting HoleConnecting to Power Connecting to MonitorConnection Focus Connecting to connectionFunction ZoomUse the six buttons on back of the camera Menu ConfigurationMenu Setup Operating Your CameraCorrecting Mistakes Cam TitleThree white balance control modes are as follows When completed, move the cursor to END and press SET buttonSet White BAL using the Left or Right button White Balance ControlOn Any motion in the selected areas is observed Tips on Using the Motion Detection FeatureBacklight Motion DetectionMoving zoom ONE Push Focus is automatically adjusted just onceCan be manually adjusted, independent of moving zoom Press the SET buttonFast To move zoom fast END To revert to the main setup menuPress the SET button to confirm Shutter Control image brightness by adjusting shutter speedAuto The iris is automatically activated upon illumination OFF HighMiddle LOWUser Preset OFF DisabledEND Revert to the Special Setup menu Preset Clear Clear configured presetLeft Area SELTOP BottomRET PKT Used to transfer a packet To reset your camera to factory default conditionTo finish setup menu CAM ID Assign an ID number to the camera 1 toTroubleshooting SDZ-300PD SpecificationsZoom Wide ResetFocus Far Focus NearOSD Menu On/Off OSD Menu Right OSD Menu UpOSD Menu Down OSD Menu LeftPlace 89 / 336 / EEC Manufacturers Name Manufacturers AddressSignature Full Name PositionMemo