Samsung SDZ-300 instruction manual Correct Disposal of This Product

Page 2

Thank you for purchasing a SAMSUNG CCD CAMERA.

Before operating the camera, confirm the camera model and proper input power voltage. In order to that you can understand this manual thoroughly, we'll introduce our model description.

SDZ-300 SERIES

•NTSC MODEL

•PAL MODEL

SDZ-300ND

SDZ-300PD

SDZ-300N

SDZ-300P

MODEL DESCRIPTION

• SDZ - 300X X

_ _

POWER SOURCE

SIGNAL SYSTEM

SIGNAL SYSTEM

N NTSC MODEL P PAL MODEL

POWER SOURCE

D DC 12V

-- DC 12V/AC 24V~ DUAL TYPE

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

INFORMATION -This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

WARNING - Changes or modifications not expressly approved by the manufacturer

could void the user’s authority to operate the equipment.

WARNING - To prevent electric shock and risk of fire hazards:

Do NOT use power sources other than that specified.

Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and

should conform to all local codes.

Image 2
Contents About this manual Sales NetworkCorrect Disposal of This Product Features Contents Precautions Do not install in high humidity environmentTripod Mounting Bracket Screw Hole OverviewTop Used to fix tripod mounting bracket on top of the cameraTripod Mounting Hole Bottom BackKey Buttons To see a far object clearlyConnection Connecting to MonitorConnecting to Power Zoom Connecting to connectionFunction FocusOperating Your Camera Menu ConfigurationMenu Setup Use the six buttons on back of the cameraCam Title Correcting MistakesWhite Balance Control When completed, move the cursor to END and press SET buttonSet White BAL using the Left or Right button Three white balance control modes are as followsMotion Detection Tips on Using the Motion Detection FeatureBacklight On Any motion in the selected areas is observedPress the SET button ONE Push Focus is automatically adjusted just onceCan be manually adjusted, independent of moving zoom Moving zoomEND To revert to the main setup menu Fast To move zoom fastAuto The iris is automatically activated upon illumination Shutter Control image brightness by adjusting shutter speedPress the SET button to confirm LOW HighMiddle OFFOFF Disabled User PresetPreset Clear Clear configured preset END Revert to the Special Setup menuBottom Area SELTOP LeftCAM ID Assign an ID number to the camera 1 to To reset your camera to factory default conditionTo finish setup menu RET PKT Used to transfer a packetTroubleshooting Specifications SDZ-300PDFocus Near ResetFocus Far Zoom WideOSD Menu On/Off OSD Menu Left OSD Menu UpOSD Menu Down OSD Menu RightPosition 89 / 336 / EEC Manufacturers Name Manufacturers AddressSignature Full Name PlaceMemo