Caution
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury.
●Leaking, overheating, or damaged battery could result in fire or injury.
-Use battery with the correct specification for the camera.
-Do not short circuit, heat or dispose of battery in fire.
-Do not insert the battery with the polarities reversed.
●Remove the battery when not planning to use the camera for a long period of time. Otherwise the battery may leak corrosive electrolyte and permanently damage the camera’s components.
●Do not fire the flash while it is in contact with hands or objects. Do not touch the flash after using it continuously. It may cause burns.
●Do not move the camera while it is switched on when you are using the AC Charger. After use, always switch off the camera before unplugging the cable from the wall socket. Then make sure that any connector cords or cables to other devices are disconnected before moving the camera. Failure to do so may damage the cords or cables and cause a fire or electric shock.
●Take care not to touch the lens or lens cover to avoid taking an unclear image and possibly causing camera malfunction.
●Avoid obstructing the lens or the flash when you capture an image.
●Before inserting any cables or AC adapter, check the directions and do not insert by force. It may cause breakage of cable or camera.
●Credit cards may be demagnetized if left near a camera case. Avoid leaving magnetic strip cards near the case.
●It is highly likely to result in computer malfunctions when the 30 pin connector is connected to the USB port of a PC. Never connect the 30 pin connector to USB port of a PC.
Contents
READY | 07 | System chart |
| 07 | Included items |
| 07 | Optional items |
08Identification of features
08Front & Top
09Rear
10Bottom
10 Cradle (Optional)
12Connecting to a Power Source
15Inserting the Battery
15Inserting the memory card
16Instructions on using the memory card
RECORDING | 18 When Using the Camera for the |
| First Time : Smart button |
19When Using the Camera for the First Time : Setting up the Date / Time and Language
20AMOLED monitor indicator
21Starting the recording mode
21 | How to use the AUTO mode |
21How to use the PROGRAM mode
22How to use the MANUAL mode
22How to use the DUAL IS (Dual Image Stabilization) mode
23Night, Portrait scene mode
23 How to use the SCENE mode
<<03 >>