Rack-Mounting the Webcache 27

If the Webcache is installed in a 19-inch rack or closed assembly its local air temperature may be greater than room ambient temperature.

The air is as free from dust as possible.

The Webcache is installed in a clean, air conditioned environment.

Rack-Mounting the The Webcache is 1U high and will fit in most standard 19-inch rack

Webcachemounts.

CAUTION: The rear of the Webcache must be supported. This is best achieved through the use of a 19-inch 4-posted rack.

CAUTION: Disconnect all cables from the Webcache before continuing.

To rack-mount your Webcache:

1Place the Webcache the right way up on a hard flat surface, with the front facing towards you.

2Locate the Rack-Mounting Kit that is supplied with the Webcache. The Kit contains the items shown in Figure 4.

Figure 4 The Rack-Mounting Kit Contents

16 x

 

 

Screws

 

 

2 x

 

 

Front

 

 

Plates

 

 

 

2 x

 

2 x

Rack-Mounting

2 x

Brackets

Rack-Mounting

 

Adjustable

Rails

 

Brackets

You must use the rails and screws supplied with the Rack-Mounting Kit. Damage caused to the Webcache by using incorrect rails and screws invalidates your warranty.

Page 27
Image 27
3Com Webcache 3000 (3C16116), Webcache 1000 (3C16115) manual Webcachemounts, Rack-Mounting Kit Contents