3Com Webcache 3000 (3C16116) manual Exiting, Displaying Changing IP-related Information, Sequence

Exiting the Command Line Interface 117

The following prompt is displayed:

Retype password:

16Re-enter the new password. A message is displayed informing you that the password has been successfully changed.

The following prompt is displayed:

Please enter mode of operation (proxy, transparent) [proxy]:

17Enter either proxy or transparent.

For further information, see “Deploying the Webcache in Your Network” on page 33.

If you entered proxy, the following prompt is displayed:

Enter caching port number

18Enter the port number on which the Webcache will listen for traffic.

The Finish prompt is displayed, which summarises the selections that you have made.

Exiting the	You can exit the Command Line Interface at any time using the logout
Command Line	command on the Top-level menu.
Interface	To exit the Command Line Interface, at the Top-level menu, enter:
	logout
	If a period of inactivity lasts longer than 30 minutes, the Webcache will
	automatically log you out.
	After the exit, the first key that you press returns you to the login
	sequence.

Displaying and

Changing IP-related

Information

You can display and change the IP-related information for the Webcache using the commands on the IP menu. These commands allow you to:

■Specify basic IP management configuration

■Configure the Domain Name System settings

■Reset IP information to factory default settings

■Send out a PING request

■Display IP summary information