Getting Started 115
Getting Started | The Getting Started command allows you to quickly configure or view |
| basic setup information for the Webcache. |
To configure basic setup information:
1At the
gettingStarted
The following prompt is displayed:
Enter system name:
2Enter a system name for the Webcache. The name can be up to 80 characters long.
The following prompt is displayed:
Enter system contact:
3Enter a system contact for the Webcache. The name can be up to 80 characters long.
The following prompt is displayed:
Enter system location:
4Enter a physical location for the Webcache. The location name can be up to 80 characters long.
The following prompt is displayed:
Enter IP address [192.168.1.253]:
5Enter a valid IP address.
The following prompt is displayed:
Enter subnet mask [255.255.255.0]
6Enter a valid subnet mask.
The following prompt is displayed:
Enter gateway IP address [0.0.0.0]:
7Enter a valid gateway IP address.
The following prompt is displayed:
Enter host name
8Enter a valid host name.
The following prompt is displayed:
Enter domain name
