Understanding the Command Line Interface 113
■System menu
This menu contains commands that allow you to view and configure information about the Webcache.
Entering Commands The command area of the Command Line Interface contains a Select menu option prompt that allows you to enter the commands in the menu area.
Commands are not
■To enter a simple command:
At the prompt, enter the name of the command.
■To enter multiple commands:
At the prompt, enter each command in succession. For example, to enter the Protocol menu and change the Webcache IP configuration, enter:
protocol ip basicConfig
from the
■To enter commands that require values:
Append the values to the name of the command. For example, to display the system menu and change your password, enter:
system password <password>
If you do not specify values for a command that requires them, you are prompted to enter the values. At each prompt, the default value is displayed in brackets.
■To enter abbreviated commands:
At the prompt, enter enough characters to uniquely identify the commands. For example, to enter the security menu and change the password for the admin user, enter:
se pa <password>
from the
■To abort a command
Press [Esc] to return to the
Displaying Menus There are several ways to display the menus in the Command Line Interface menu structure:
