Displaying and Changing Webcache Information and Functions 125
To set the community string:
1At the Top-level menu, enter:
system management community
The following prompt is displayed:
Enter new community for user ‘admin’[private]:
2Enter a community string for the admin user name.
Displaying Summary You can display the summary information for the Webcache using the Information summary command on the System menu. This information may be useful
for your technical support representative if you have a problem.
To display the information:
1At the
system summary
The administration details are displayed as shown in the example below:
3Com SuperStack 3 |
|
System Name | : Development |
Location | : Wiring Closet, Floor 1 |
Contact | : System Administrator |
Time Since Reset | : 2 days, 3 hours, 10 minutes |
Software Version | : 1_00 |
Hardware Version | : 1.0 |
MAC Address | : 08:00:00:00:11:11 |
Serial Number | : 7ZNR001111 |
The following read-only fields are displayed:
■System Name
Displays the descriptive name, or system name, for the Webcache. For information about assigning a new name, see “Specifying a Webcache Name”on page 124.
■Location
Displays the physical location of the Webcache. For information about assigning a new location, see “Specifying Location Details” on page 124.
