Samsung NV24 HD, ECNV24HBBA manual Instructions on using the memory card

Page 17

Instructions on using the memory card

Be sure to format the memory card (see p.69) if you are using a newly purchased memory card for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera.

Turn off the camera power whenever the memory card is being inserted or removed.

Repeated use of the memory card will eventually reduce its performance. Should this be the case, you will need to purchase a new memory card. Wear and tear on the memory card is not covered by the Samsung warranty.

The memory card is an electronic precision device. Do not bend, drop or subject it to any heavy impact.

Do not store the memory card in an environment with strong electronic or magnetic fields, e.g. near loudspeakers or TV receivers.

Please do not use or store in an environment where there are extremes in temperature.

Do not allow the memory card to become dirty or to come into contact with any liquid. Should this happen, clean the memory card with a soft cloth.

Please keep the memory card in its case when not in use.

During and after periods of extended use, you may notice that the memory card is warm. This is perfectly normal.

Do not use a memory card that is used in another digital camera.

To use the memory card in this camera, format the memory card using this camera.

Do not use a memory card formatted by another digital camera or memory card reader.

If the memory card is subjected to any of the following, the recorded data may become corrupted :

-When the memory card is used incorrectly.

-If the power is switched off or the memory card is removed while recording, deleting (formatting) or reading.

Samsung cannot be held responsible for lost data.

It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard disks, CD etc.

If there is insufficient memory available

: A [Memory Full!] message will appear and the camera will not operate.

To optimise the amount of memory in the camera, replace the memory card or delete unnecessary images stored on the memory card.

● Don’t remove the memory card when the camera status lamp is blinking as this may cause damage to data in the memory card.

<<16 >>

Image 17
Contents Page Thank you for buying a Samsung Digital Camera InstructionsGetting to Know your camera Page Contents Playing back a movie clip Playing back a still imageMovie clip capture function On camera movie trimmingAuto power off Sound VolumePlaying Images OSD setPlayback Requirements System RequirementsRemote control Cradle SCC-NV4HD Hdmi cable Camera case System chartIncluded items Optional itemsRemote control sensor Identification of featuresPower button Front & TopRear Cradle Optional BottomTripod socket TerminalCamera Status Lamp Self-timer lampMode icon SLB-1137D rechargeable battery specification Connecting to a Power SourceConnecting to a Power Source Charging LED of the AC Adapter When the cradle is not usedInsert the battery as shown Inserting the BatteryBattery Indicator Inserting the memory cardInstructions on using the memory card Image Still1280 AboutWhen Using the Camera for the First Time Smart button Setting up the date, time and date type Setting up the languageVertical smart button Smart buttonIcons Amoled monitor indicatorHow to use the Auto mode Starting the recording modeHow to use the Program mode Close the battery chamber coverThings to watch out for using the Dual is mode How to use the Manual modeHow to use the Dual is Dual Image Stabilization mode Select a desired mode by rotating the mode dial Night, Portrait scene modeHow to use the Scene mode What is H.264MPEG4 part10/AVC ? How to use the Movie modeRecording HD High Definition movie clips ButtonUsing Successive Recording Using Photo Style Selector ModeRecording the movie clip without sound You can record the movie clip without soundPressing the shutter button down half way Things to Watch Out for When Taking PicturesPower button Using the camera buttons to set the cameraShutter button OIS Optical Image Stabilization buttonDigital zoom Tele Zoom W / T buttonSubject will appear nearer Wide Zoom Menu Using the Amoled monitor to set the cameraFocus Type Wide W Tele T Selecting focus typeTypes of focus modes and focus ranges Flash When using the Dual IS, ContinuousCafé mode, the flash will not operate Unit m1280 640 320 Flash mode indicatorSize Focus Area Center AF Metering Continuous shotSaturation control Image AdjustSharpness ContrastEffect Pictures can be adjusted prior to shootingQuality / Frame rate It can only be set if Is selected on the photoDescription of Self-timer / Remote mode Self-timer / Remote controlRemote control range Replacing battery for the remote controlVoice recording Voice recording / Voice memoWhite balance Using the Custom White BalanceCompensating Exposure You can select the ISO sensitivity when taking picturesExposure compensation ACB Auto Contrast Balance Setting up the shutter speedShutter Speed Aperture ValueScene menu Select the Play mode by pressing Play mode button Starting play modePlaying back a still image Playing back a movie clipOn camera movie trimming Movie clip capture functionPlaying back a recorded voice Playing back a recorded voice memoON/OFF Description IconPlay mode button Using the camera buttons to adjust the cameraYou can play the movie clip and images by remote control Back buttonThumbnail display Thumbnail / Enlargement buttonImage enlargement Maximum enlargement rate in proportion to the image sizePlaying Images Press the Smart button to select a desired play back modeImages for a specific date or all images can be played Photos can beSetting play interval Configure slide show effectsStarting the slide show Images can be displayed continuously at pre-set intervalsThis is used to delete the displayed image Protecting imagesDeleting images Many prints to make Configure number Prints for all picturesPrinters, or at an increasing number of photo labs But are not selectableDpof Index Setting the Print SizeDpof Print size Image Resize Types Rotating an image ResizeStart IMAGE, the existing startup image will be deleted Shaded Noise effect Special ColourElegant Colour Filter Contrast control Brightness control Red eye removalYou can change the brightness of the image Red eye effect can be removed from the captured imagePress the Anynet+ button on the TV remote control How to use the Anynet+CECAnynet+CEC Saturation controlPrint mode Setting up the camera for connection to a printerPictBridge Easy printingCustom Set Printing images Custom modeReset Sub menu Setup menuRecording LowMenu Main menu Sub menu How to select the setup menuOSD set You can adjust the Amoled brightnessDisplay Bright Hdmi SizeStart up image Operation Sound Sound VolumeFile name Shutter soundStart up sound AF soundAuto Focus lamp Self Portrait Quick viewThere is an option to include Date / Time on still images Imprinting the recording dateCopy To Card Formatting a memory Delete AllSub menus No The memory will not be formatted No Image! message will appearWorld Time Setting up the Date / Time / Date typeLanguage Connecting to an external monitor Movie output signal from the camera can be Ntsc or PALInitialisation Selecting Video out typeAuto power off Important notes Extremes in temperature may cause problemsSand can be particularly troublesome to cameras Handling the cameraFile Error Camera MaintenanceDo not attempt to disassemble or modify the camera Card LockedLow Battery Before contacting a service centreDCF Full Error Low LightIncorrect memory card format € Re-format the memory card Images are unclearImage Sensor SpecificationsLens ShutterEffect FlashWhite Balance Voice RecordingWeight Dimensions WxHxDOperating Humidity SoftwareSystem Requirements Software Notes1GB recommended QuickTime Player 7.4 H.264MPEG4.AVC playback RequirementsQuickTime Player 7.4 The movie viewing program About the softwareYou can visit the Samsung web-site through the internet Setting up the application softwareSetting up the application software Connecting the camera to a PC Starting PC modeSelect the USB-Computer menu by using Connect the PC to the camera with the USB CableDownloading stored images Using Removable DiskConnect the camera to your PC with the USB cable CutWindows 98SE Removing the removable diskTo remove the USB driver, refer to the process shown below Using the USB Driver for MACSetting up the USB Driver for MAC Samsung Master Image edit You can edit the still image Image viewer You can view the stored imagesMedia asf file types SaturationFAQ → Plays back using the video player How to playback the H.264MPEG4.AVC movie clipsDeclaration of Conformity Correct Disposal of This ProductFCC notice Correct disposal of batteries in this product Memo