Quantum Instruments QFT5d-R Automatic Mode Operation, Automatic Mode with Sync only Connection

Page 18

QFT5D INSTRUCTIONS 10/5/06 10:27 AM Page 18

Reminder: If the distance to the subject changes (you move in for a head shot, or move out for a full length) you must change the flash distance readout by changing the power setting.

10. AUTOMATIC MODE OPERATION

The preferred setup for Auto Mode is to connect Qflash to a camera with a QTTL (D, Dw, or Dw-R series) Adapter. Then, the ISO and f/# settings of the camera are set and displayed on the Qflash panel. Qflash will display “Auto Fill” indicating that fill/flash ratio may be set on the QTTL Adapter. The camera may be set to manual, shutter or aperture priority, however light output is controlled by Qflash.

10.1 Automatic Mode with Sync only Connection

Using only a plain sync cord, Qflash displays “Auto” Mode. F/# and ISO are set on the Qflash display manually. Press Set G to select f/#, then press the Up J/Down L keys to change the setting. Similarly, press Set G twice to select ISO and change it.

Flash distance displays the working distance between your Qflash and Subject based on the current settings. Moving outside this range may result in an Under or Overexposed picture.

14

Image 18

Contents Qflash 5d-R series Digital Flash QFT5D Instructions 10/5/06 1027 AM QFT5D Instructions 10/5/06 1027 AM Flash Display Symbols Table of Contents IntroductionAdvanced Features Summary FeatureFeatures Available with Qttl D, Dw, Dw-R Series Adapters Excessive force is not required Getting StartedInserting the Flash Tube Reflectors and Bare BulbConnecting Qflash to a Camera Bracket MountingBasic Navigation Common Features Reflector settings Option Menu Flash Sensor Limit for Auto ModeFlash Indicator Lights Basic OptionsSetting Compensation Distance UnitsOption Menu Exposure Compensation Manual mode Qflash Compensation Auto mode Qflash Compensation Restoring Factory settings Option Menu 3 FW7Q Zone ControlManual Mode Operation Manual mode with Qttl adapter connection Manual shooting made easyAutomatic Mode Operation Automatic Mode with Sync only ConnectionAuto mode exposure indications Auto Fill Auto mode with Qttl adapterOUT of Range Decrease Fill or F# Auto Sensor LimitSetting the Sensor Limit Quick turn on / OFF of Sensor LimitUsing the Sensor Limit Open fieldTwo subjects separated by a gap TTL Mode Qttl modeStroboscopic Mode Operation Program Mode OperationHow to set up or change a Program To clear out a ProgramQTTLw Wireless TTL mode Set up the Remote QflashsLocal Qflash is optional Always set up the Remote Qflashs first Local, on-camera flash is requiredWireless Auto Fill Set up the Mode of the Remote QflashsLocal, on-camera flash is optional Wireless Control Mode Local Qflash is requiredSet up the Remote Qflash Groups Wireless Control Mode Important NotesAvailable Modes and Features of Qflash Wireless Operation Sync only setup Example of independent Qflash operationWired Control Mode Set up the Control UnitSelect the Mode and settings for all flashes Selecting a different flash as the control flashChanging Remote 1 to Remote 2 or Remote 2 to Remote Typical Lighting Situations PortraitWireless lighting ratios made easy Lighting ratios using a control cableCustomer Service Limited WarrantySummary Qflash Accessories Other Quantum Products P635