Minolta 5600HS (D) appendix Multiple Flash Multi, Press the select button to blink

MULTIPLE FLASH (MULTI)

The flash is triggered a number of times while the shutter is open. Multiple flash allows motion of the subject to be captured in a photo- graph for later analysis.

•The camera must be set to the M (manual) mode for multiple flash pho- tography. Multiple flash cannot be used unless the camera supports the M mode.

1. Set the camera to the M mode.

2. Press the mode button to dis-

play of the data panel.

4. Press the + or – button to select the flash frequency.

• The flash frequency may be selected from the following.

100, 50, 40, 30, 20, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1

• Press and hold the + or - buttons to change the value rapidly.

5. Press the select button to blink

[TIMES].	FLASH
data panel.
• The current number of flashes for
multiple flash is displayed on the	MULTIPLE
selected from the following.
6. Press the + or – button to

select the number of flashes.

• The number of flashes may be

--, 40, 35, 30, 25, 20, 15, 10, 9, 8, 7, 6, 5, 4, 3, 2

60

3.Press the select button to blink [Hz].

•The current multiple flash frequency (flashes per second) is displayed on the data panel.

• Press and hold the + or - buttons to change the value rapidly.

• When -- is selected flashes continue at the set frequency while the shutter is open.

Continued on next page

61