Minolta 5600HS (D) appendix Using xi Series Single Lens Reflex Cameras

Page 35

APPENDIX

USE IN COMBINATION WITH OTHER PRODUCTS

Read this manual in combination with the relevant manual when any of the following products are used in combination with the 5600HS (D).

Using xi Series Single Lens Reflex Cameras

(Maxxum/Dynax 9xi, 7xi, 5xi, 3xi, SPxi, 2xi)

•Flash is automatic in the P mode with the 9xi, 7xi, 5xi and 3xi. Fill flash may also be selected. See the camera manual for details.

•Flash is automatic in the P mode with the SPxi and 2xi. Fill flash can- not be selected.

•The shutter speed is set automatically in the S mode with the 7xi, 5xi, 3xi, SPxi, and 2xi.

•High-speed sync cannot be used.

•As the 9xi has no built-in flash, only [2] and [3] on page 41 and 42 may be used for wireless flash. Use the AE lock button for test flash.

•Wireless photography with the 7xi, 5xi, and 3xi is possible only with [1] on page 41 (Using The Built-In Flash). See the camera manual for details of taking photographs.

•Test flash for the wireless flash cannot be used while Eye-start is in use.

•Select Channel 1 when using wireless flash with the 3xi.

•Wireless flash cannot be used with the SPxi and 2xi.

Using i Series Single Lens Reflex Cameras (Maxxum/Dynax 8000i, 7000i, 5000i, 3000i)

3000i, off-camera ratio flash control cannot be used.	COMBINATION
• Flash is automatic in the P mode. Fill flash may also be selected with

the 8000i. See the camera manual for details.

• Flash is automatic in the S mode, and the shutter speed is set auto- matically.

• High-speed sync and wireless flash cannot be used.

• As the proper exposure may not be obtained with the 5000i and

68

69

Image 35

Contents Applications Appendix Program Flash Maxxum FlashFor Proper and Safe USE Contents Flash Units Cameras and Flash UnitsCameras Names of Parts Flash Unit Diagram Control PanelData Panel Names of PartsChecking Batteries Installing BatteriesChamber Close the battery-chamber door Attaching and Removal Auto Power ON/OFF and FilmThat the subject is within Flash range Mode Flash the BasicsPress the shutter-release but Ton partway down and checkSet the shutter speed, and focus the subject Mode Flash the BasicsExposure Modes Set the aperture and focus the subjectSet the aperture and shutter speed, and focus the sub- ject Exposure ModesZoom Zoom Flash CoverageAuto Zoom Pull out the adapter Zoom Flash CoverageManual Zoom Built-In Wide Angle Adapter 17mm zoom angleFlash once at the set light level Level 1/1~1/32 Hold The setting prevents mis-operationTEST-FLASH/MODELING Flash Flash may be set to the following angles Bounce FlashFlash Bounce Flash Adjusting Bounce AngleIlluminates the data panel at low-light levels Data Panel IlluminatorAF Illuminator Press the data panel illuminatorMODE/SELECT Button Mode and Select ButtonsManual Flash M Press the + or button to select the power level to be setHSS HIGH-SPEED Sync HSSPlay PanelUsing two flash units p WIRELESS/REMOTE Flash ModeTypes Of Wireless/Remote Flash Using the built-in flash pFollowing two modes are avail- able WIRELESS/REMOTE Flash ModeUsing the Wireless Remote Flash Controller p Wireless Flash RangeWIRELESS/REMOTE Flash Mode Check that the built-in flash 5600HS D are fully charged Using The Built-In FlashSet the camera to wireless flash Setting Wireless/Remote Flash By Flash OnlySwitch the 5600HS D on Using Two Flash UnitsSetting Up The Controller Setting Up The Off-Camera FlashTaking Photos Check that both flash units are fully chargedUse test flash to check the off-camera flash Press the select buttonRefer to the Wireless Remote Flash Controller manual Using Wireless Remote Flash ControllerRatio-Flash Control Using Two Or More Flash Units Using 5600HS D, 5400HS, 5400xi onlySet up the 5600HS D with the wireless ratio off-camera flash Press the select button Using with 3600HS D orAll the flash units in a and B group can be used Connecting Camera and Flash by CableEqualizing The Power Level Of All Flash Units Connecting by CablePower level for the flash can be adjusted Setting Power Level LevelPower Level Press the + or button to Select the number of flashes Multiple Flash MultiPress the select button to blink Maximum Number Of Continuous Flashes Multiple Flash Multi Press the select button to blink Level on the data panel Press the select button Set the shutter speed and aperturePress the select button to Reset to Default SettingsCustom Function Press the select button for SecondsTime to auto power off when using wireless Press the mode buttonWireless channel setting Time to auto power offMaxxum/Dynax 9xi, 7xi, 5xi, 3xi, SPxi Using xi Series Single Lens Reflex CamerasUSE in Combination with Other Products Using Early AF Series Single Lens Reflex CamerasUsing APS Single Lens Reflex Cameras Using Minolta Digital CamerasAccessories AccessoriesBatteries TemperatureMaintenance During PhotographyPerformance PerformanceMemo 9222-8841-11 P-B00X