Sanyo LNS-W32 manual Lens Replacement Procedure for B Type, Fig-1-1, Fig-1-2, Fig-1-3

Page 5

LENS REPLACEMENT PROCEDURE (FOR "B" TYPE)

Perform the steps 1 to 5 for lens replacement.

First set the lens at the fully lower position with lens shift adjustment.

SCREW "A"

FRONT CABINET

1 REMOVE THE LENS COVER AND

FRONT CABINET

1. Turn the lens cover to counter-clockwise and

pull it toward front and remove the Lens

Cover.

2. Remove 2 Screws-A.

LENS COVER

Fig-1-1

3. Remove the front cabinet

See Figure-1-1 and 2.

1.Remove 3 Screws-A.

2.Remove the front cabinet

See Figure-1-2 and 2.

1.Pull Lens Cover toward front and remove it.

2.Remove 2 Screws-A.

3.Remove the front cabinet

See Figure-1-3 and 2.

SCREW "A"

FRONT CABINET

Fig-1-2

LENS COVER

SCREW "A"

 

2

REMOVE THE LIGHT-BLOCK SHEET BASE AND LIGHT-BLOCK SHEET (See Figure-2)

1.Slide the light-block sheet base upward and remove it.

2.Remove the light-block sheet from lens.

Fig-1-3

FRONT CABINET

LIGHT-BLOCK

SHEET BASE

LIGHT-BLOCK

SHEET

LENS COVER

FRONT CABINET

Fig-2

-5-

Image 5
Contents Lens Parts ListLIGHT-BLOCK Sheet Base LIGHT-BLOCK SheetFig-1 Lens Replacement Procedure for a TypeFig-2 Fig-3Fig-5 Fig-6 Focus AdjustmentFig-7 Confirm the FocusFig-1-1 Lens Replacement Procedure for B TypeFig-1-2 Fig-1-3Lens Lock Latches Mount the Front Cabinet and Lens Cover See Remove the Lens Cover and Front Cabinet Lens Replacement Procedure for C TypeRemove the LIGHT-BLOCK Sheet Base and LIGHT-BLOCK Sheet Remove the LensLens Lens Lock Lever Attachment Spacer Driver Mount the LensMount the Front Cabinet and Lens Cover Mount the LIGHT-BLOCK Sheet and LIGHT-BLOCK Sheet Base