Sanyo LNS-W32 Lens Replacement Procedure for C Type, Remove the Lens Cover and Front Cabinet

Page 8

LENS REPLACEMENT PROCEDURE (FOR "C" TYPE)

Perform the steps 1 to 6 for lens replacement.

First set the lens at the fully lower position with lens shift adjustment.

1REMOVE THE LENS COVER AND FRONT CABINET

1.Turn the lens cover to counter-clockwise and pull it toward front and remove the Lens Cover.

2.Remove 2 Screws-A.

3.Remove the front cabinet

2REMOVE THE LIGHT-BLOCK SHEET BASE AND LIGHT-BLOCK SHEET

1.Slide the light-block sheet base upward and remove it.

2.Remove the light-block sheet from lens.

SCREW "A"

FRONT CABINET

LENS COVER

LIGHT-BLOCK

SHEET BASE

LIGHT-BLOCK

SHEET

LENS COVER

FRONT

CABINET

3REMOVE THE LENS

1.Grasp the Lens Lock Lever and turn it fully upward. Remove the Lens into the projector.

2.Disconnect the lens motor lead connector to the socket on the lens attachment.

3.Remove 4 Screws and remove lens attachment.

LENS LOCK

Pull the LensLEVER Lock Lever

upward

LENS

SCREWATTACHMENT

SOCKET

CONNECTOR

LENS MOTOR

LEAD

- 8 -

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Parts List LensLIGHT-BLOCK Sheet Base LIGHT-BLOCK SheetLens Replacement Procedure for a Type Fig-1Fig-2 Fig-3Fig-5 Focus Adjustment Fig-6Fig-7 Confirm the FocusLens Replacement Procedure for B Type Fig-1-1Fig-1-2 Fig-1-3Lens Lock Latches Mount the Front Cabinet and Lens Cover See Lens Replacement Procedure for C Type Remove the Lens Cover and Front CabinetRemove the LIGHT-BLOCK Sheet Base and LIGHT-BLOCK Sheet Remove the LensMount the Lens Lens Lens Lock Lever Attachment Spacer DriverMount the LIGHT-BLOCK Sheet and LIGHT-BLOCK Sheet Base Mount the Front Cabinet and Lens Cover
Top Page Image Contents