Audio Analogue SRL STEREO LINE PREAMPLIFIER owner manual Stand-by

Page 14

14

Notes on inputs bypassing

Set-up has an option that allows sending the input signal to the outputs to bypass the amplifier when the unit is in stand- by mode. It is possible to choose among the 8 available outputs. This option is useful when you want to integrate the preamplifier into a multi-channel system, so that you can connect it to high-quality stereophonic sources while connecting the multi-channel processor to audio/video sources.

Note sul by-pass degli ingressi

E’ disponibile una opzione del set-up che permette di inviare sulle uscite il segnale di ingresso bypassando l’amplificatore quando l’apparecchio si trova in stand-by. E’ possibile operare anche una scelta tra le 8 sorgenti possibili. Questa opzione risulta essere molto utile qualora si voglia integrare questo premplificatore in un impianto multicanale, in modo da poterlo utilizzare per le sorgenti stereofoniche di alta qualità mentre il processore multicanale viene impiegato per le sorgenti audio/video.

Stand-by

Maestro Line Preamplifier may be put in Stand-by by pressing the “STANDBY” button on the front panel or the “STBY” button on the remote controller. When the preamplifier is in stand-by mode and the inputs by-pass is off, all outs are deactivated: when inputs by-pass is on, the signal of the selected input is directly sent to the outputs. In both cases, the display on the front panel is off and the led lights blue. To exit the stand-by mode, you may use the remote control or, alternatively, you may press the stand-by button on the front panel: the unit will exit the stand-by mode immediately. It is preferable to put Maestro Line Preamplifier in stand-by mode when not using it: the analogical circuit will stay on and keep the right temperature to provide high performances.

Stand-by

Il Maestro Line Preamplifier può essere posto in stand-by premendo il pulsante “STAND BY” sul pannello frontale oppure “STBY” sul telecomando. Quando il preamplificatore è in stand-by e il by-pass degli ingressi non è attivo (Off), tutte le uscite sono disattivate; se invece il by-pass è attivo (On) il segnale di un ingresso selezionato viene inviato direttamente sulle uscite. In entrambi in casi il pannello frontale presenterà il diplay spento e il led blu acceso. Per uscire dallo stand- by è possibile agire ancora sul telecomando. In alternativa, è sufficiente agire sul pulsante del pannello frontale: l’apparecchio uscirà immediatamente dallo stand-by.

E’ consigliabile porre il Maestro Line Preamplifier in stand-by quando non lo si utilizza: la circuitazione analogica rimane accesa e in temperatura, quindi predisposta per fornire sempre le massime prestazioni.

How to use the serial port

Maestro Line Preamplifier is equipped with a standard RS-232 serial port. You may remotely control the CD player hooking it up to a PC or a home-automation unit through this port. For technical details, please contact your local Audio Analogue retailer or go to www.audioanalogue.com.

Note sull’utilizzo della porta seriale

Il Maestro Settanta è dotato di una porta seriale in standard RS-232. Tramite questa porta è possibile controllare l’apparecchio tramite un PC o una centralina per l’home automation. Per maggiori dettagli, contattare il vostro rivenditore Audio Analogue di fiducia o visitare il sito web www.audioanalogue.com.

Configuration through set-up activation

Maestro Line Preamplifier is an extremely versatile unit. The controls on the front panel and on the remote controller allow to access to the most used functions but not to the configuration parameters. To customize the unit configuration, you may access the set-up by pressing the “SET” button on the remote controller or the “SETUP” button on the front panel. Set-up options will then be shown on the display.

Configurazione attraverso l’attivazione del set-up

Il Maestro Line Preamplifier è un apparecchio estremamente versatile. Ovviamente, i controlli disponibili sul pannello frontale o sul telecomando permettono di accedere alle funzionalità operative di più frequente utilizzo ma non ai parametri di configurazione. Per personalizzare la configurazione dell’apparecchio è disponibile un completo setup accessibile da pannello frontale o da telecomando e visualizzato sul display del pannello frontale. Il set-up viene richiamato premendo il pulsante “SET” sul telecomando oppure premendo il pulsante “SET UP” sul pannello frontale dell’apparecchio.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Audio Analogue Page Introduction Premessa Dear Audiophile Caro AudiofiloFeatures Caratteristiche costruttiveFront panel Descrizione del pannello frontaleChassis a back panel Chassis B back panelDescrizione del pannello posteriore telaio a Descrizione del pannello posteriore telaio BRemote controller Descrizione del telecomandoApertura e ispezione dell’imballo Where to place Maestro Line PreamplifierUnpacking and checking package Collegamento del Maestro Line Preamplifier Plugging and connecting Maestro Line PreamplifierPowering up Maestro Line Preamplifier Accensione del Maestro Line PreamplifierSound sources choice Inputs selection for listening Volume settings and silencing muteRegolazione del volume e silenziamento mute Inputs selection for recordingStand-by Configurazione attraverso l’attivazione del set-upStand-by Navigazione del set-up Set-up navigationSet-up options Opzioni di set-upSpecifications Specifiche Tecniche 10Hz-30kHzList above, please contact your Local Audio Analogue retailerRicerca Guasti SintomoAudio Analogue

STEREO LINE PREAMPLIFIER specifications

The Audio Analogue SRL Stereo Line Preamplifier is a remarkable component engineered for the discerning audiophile, providing a standalone platform that enhances the music listening experience. This preamplifier exemplifies the brand’s commitment to delivering high-quality audio performance through innovative technologies and exceptional craftsmanship.

At the heart of the SRL preamplifier is its dual-mono architecture. This design separates the left and right audio channels to minimize crosstalk and ensure that each channel reproduces sound with pristine clarity. This configuration enables users to enjoy a more immersive and precise audio experience, making it a perfect choice for stereo setups.

One of the standout features of the SRL is its advanced circuit design, which incorporates high-grade components to enhance signal fidelity. The audio circuit employs a low-noise linear power supply, ensuring that the preamplifier operates without the interference of unwanted noise or distortion. This contributes to the overall performance, offering dynamic range and accurate sound reproduction across various audio sources.

The preamplifier supports multiple inputs, allowing users to connect various devices, such as CD players, turntables, and digital sources. Its input selector switch, conveniently positioned on the front panel, makes it easy to transition between sources without compromising sound quality. The balanced and unbalanced output options provide flexibility in integrating the preamplifier into existing audio systems, catering to different equipment configurations.

Another notable characteristic is the meticulously engineered volume control. The SRL features a high-quality potentiometer that facilitates smooth and precise adjustments, giving users absolute control over their listening levels. Additionally, the preamp possesses a robust and elegant chassis design, constructed from sturdy materials that not only ensure durability but also help minimize resonance and vibrations.

Designed with both aesthetics and functionality in mind, the Audio Analogue SRL Stereo Line Preamplifier merges modern technology with timeless style. Its sleek finish and minimalistic interface make it a visually appealing addition to any hi-fi setup. Overall, the SRL preamplifier stands out as a sophisticated device that combines technical prowess with user-friendly features, making it a valuable asset for any serious music enthusiast looking to elevate their listening experience.
Top Page Image Contents