ENGLISH
Troubleshooting
✤If these instructions do not solve your problem, contact your nearest Samsung authorized service center.
Symptom | Explanation/Solution |
You cannot switch the | Check the battery pack or the AC Power Adapter. |
camcorder on. |
|
|
|
START/STOP button | Check the POWER switch is set to CAM. |
does not operate while | You have reached the end of the cassette. |
recording. | Check the record protection tab on the cassette. |
|
|
The camcorder goes off | You have left the camcorder set to STBY for more than |
automatically. | 5 minutes without using it. |
| The battery pack is fully exhausted. |
The battery pack is | The atmospheric temperature is too low. |
quickly exhausted. | The battery pack has not been charged fully. |
| The battery pack is completely dead, and cannot be |
| recharged, Use another battery pack. |
|
|
When you see a blue | The video heads may be dirty. |
screen during playback. | Clean the head with a cleaning tape. |
|
|
A vertical strip appears | The contrast between the subject and the background is |
on the screen when | too great for the camcorder to operate normally. |
recording a dark | Make the background bright to reduce the contrast or use |
background. | the BLC function while you are recording brighter. |
The image in the | The Viewfinder lens has not been adjusted. |
viewfinder is blurred. | Adjust the viewfinder control lever until the indicators |
| displayed on the viewfinder come into sharp focus. |
Auto focus does not | Check the M.FOCUS menu. |
work. | Auto focus does not work in the Manual Focus mode. |
Play, FF or REW | Check the POWER switch. Set the power switch to |
button does not work. | PLAYER. |
| You have reached the beginning or end of the cassette. |
When you see a broken | This is normal operation and it is not a failure or defect. |
block image during the |
|
RECORD SEARCH. |
|
✤
START/STOP
RECORD SEARCH( 
107 | 107 |