Samsung SC-D99 manual Audio dubbing, Dubbing sound

ENGLISH

Advanced Recording

Audio dubbing

✤The AUDIO DUBBING function only works in PLAYER Mode.

✤You can add sound to the original sound on a pre-recorded tape, recorded in SP mode with 12bit sound.

✤Use the internal and external microphones or other audio equipment.

✤The original sound will not be erased.

Dubbing sound

1.Set the camcorder to PLAYER mode.

■ If you want to use an external microphone, connect the microphone to the external MIC input jack on the camcorder.

■ When you wish to dub using the External A/V input, connect the Multi-AV cable to the camcorder by inserting the Multi-AV cable into the Multi-AV Jack at the front side of the camcorder.

✤

✤

✤

✤

1.

■

■

-

-Press the MENU button, move the MENU

SELECTOR to highlight A/V and push the MENU SELECTOR.

Audio (L) Audio (R)

-

- Move the MENU SELECTOR to highlight AV IN/OUT and push the MENU SELECTOR to select AV IN/OUT.

-Move the MENU SELECTOR to highlight AV IN (or S-VIDEO IN) and push the MENU SELECTOR

		to select AV IN (or S-VIDEO IN).
2.	Press the		(PLAY/STILL) button and find the
	timeframe of the scene to be dubbed.
3.	Press the		(PLAY/STILL) button to pause the
	scene.
4.	Press the A.DUB button on the Remote Control.
	■ A.DUB will be displayed on the LCD.
	■ The camcorder is in a ready-to-dub state for
	dubbing.
5.	Press the		(PLAY/STILL) button to start dubbing.

■Press the (STOP) button to stop the dubbing.

Notes

■You can not use the audio dubbing function while playing a write protected video tape.

■When you wish to dub using the External A/V input, you must connect the Multi-AV cable to the audio system from which you wish to record.

■When adding sound using the built-in microphone, make sure not to connect any cables to the camcorder.

66 ■ You can not dub sound on a pre-recorded tape in LP mode or 16 bit mode.

AV IN

■

■

■

■

-

2.

3.

4.

■

■

5.

■