Samsung SC-D99 manual Controlling Sound from the Speaker, Adjusting the LCD during Play

ENGLISH

Basic Recording

Adjusting the LCD during PLAY

✤You can adjust the LCD during playback.

✤The adjustment method is the same procedure as used in CAM mode. (see page 31)

✤

✤

Controlling Sound from the Speaker

The Speaker works in PLAYER mode only.
■ When you use the LCD screen for playback, you can hear recorded	■
sound from the built-in Speaker.

-Follow the instructions below to decrease or mute

speaker volume in the PLAYER mode. 2

-Take the following steps to lower the volume or

mute the sound while playing a tape on the camcorder.

1. Set the power switch to PLAYER mode.

2.	Press	(PLAY/STILL) to play the tape.
3.	When you hear sounds once the tape is in play, use the
	MENU SELECTOR to adjust the volume.

■ A volume level display will appear on the LCD.	3-1
Levels may be adjusted from anywhere between 00	VOLUME
to 19. You will not hear any sound when the volume
is set on 00.
■ If you close the LCD while playing,
you will not hear sound from the speaker.

-

-

1.

2. (PLAY/STILL)

3.

■

■

Notes

■When the cable is connected to the Multi AV jack, you cannot hear sound from the speaker and cannot adjust the volume.

■If a cable is connected to the Multi AV jack, you can hear sound from the speaker when AV IN/OUT MODE on MENU is set to AV IN or S-VIDEO IN.

■You can hear sound from speaker by removing the connected cable from the Multi AV jack.

■The speaker turns off when you use earphones.

<3-2>

0 : 2 3 : 4 7

5 5 min

VOL.	[ 1 1 ]	1 0 : 0 0 A M
		J A N . 10 , 2 0 0 3

■

■

■

■

34