ENGLISH
Preparation
Using the Lithium Ion Battery Pack
✤ The amount of continuous recording time available depends on : | ✤ |
| |
| - The type and capacity of the battery pack you are using. | - | . |
| - How often the Zoom function is used. | - |
|
| It is recommended that you have several batteries available. |
|
|
Charging the Lithium Ion Battery Pack |
|
| |
1. | Attach the battery pack to the camcorder. |
| 1. |
2. | Connect the AC Power adapter to an AC |
| 2. |
| cord and connect the AC cord to a wall |
|
|
| socket. |
|
|
3. | Connect the DC cable to the DC jack |
| 3. |
| socket on the camcorder. |
| 4. |
4. | Turn the Camera power switch to off, and |
|
|
| the charging indicator will start to flash, |
|
|
| showing that the battery is charging. |
|
|
Blinking time | Charging rate |
|
|
Once per second | Less than 50% |
Twice per second | 50% ~ 75% |
Three times per second | 75% ~ 90% |
Blinking stops and stays on | 90% ~ 100% |
On for a second and | Error - Reset the battery pack and |
off for a second | the DC cable |
5. When the battery is fully charged, disconnect the battery | 5 | |
pack and the AC Power adapter from the camcorder. | ||
| ||
■ Even with the power switched off, the battery pack will |
| |
still discharge if it is left connected to the camcorder. |
|
Notes
■The battery pack may have some charge in it at the time of purchase.
■To prevent reduction in the life and capacity of the battery pack, always remove it from the camcorder after it is fully charged.
24
1 | 1 | 50% |
1 | 2 | 50% ~ 75% |
1 | 3 | 75% ~ 90% |
|
| 90 ~ 100% |
5.
■
■
■