ENGLISH |
|
IEEE 1394 Data Transfer | IEEE 1394 |
Recording with a DV connection cable |
|
1. Set the mode switch to TAPE.
2. Set the power switch to PLAYER mode.
3. Connect the DV cable (not supplied) from the DV IN/OUT port of the camcorder to the
DV IN/OUT port of the other DV device.
■ Make sure that DV appears on the screen.
4. Press the START/STOP button to begin REC PAUSE mode.
■ PAUSE is displayed on the OSD.
5.Start playback on the other DV device while you monitor the picture.
6. Press the START/STOP button to start recording.
■ If you want to pause recording momentarily, press the START/STOP button again.
7.To stop recording, press the
(STOP) button.
Notes
■When using this camcorder as a recorder, the pictures that appear on a monitor may seem uneven, however recorded pictures will not be affected.
■Operation is not guaranteed for all the recommended computer environments mentioned above.
■
■
1.
2.
3.
■
4.
■
5.
6.
■
7.
77