12
Product Presentation
Controls
Power Indicator
●When the green power indicator is illuminated, a 24V supply is connected to the printer.
Status Indicator
●The status indicator has several functions:
• ON constantly — the printer is operational
•Flash, flash, pause, flash, flash — is the
The
•Flashes rapidly — indicates error. Hold down the Feed button and the number of flashes will reflect the
| Table 1 • Status Indicator Flash Codes | |
|
| |
Number of | Description | |
Flashes | ||
| ||
|
| |
1 | Presenter jam, paper cannot be ejected | |
|
| |
2 | Cutter cannot return to home position | |
|
| |
3 | Out of paper | |
|
| |
4 | Printhead lifted | |
|
| |
5 | Paper did not reach presenter sensor in time | |
|
| |
6 | Temp error, printhead is above 60°C | |
7 | Paper jam during present | |
|
| |
10 | TOF mark not found (on media load) | |
|
| |
11 | TOF mark calibration error | |
|
| |
Fast flashes | Checksum error at firmware loading | |
|
| |
Steady light | Wrong firmware type | |
|
| |
Constantly off | Waiting for paper in TOF mark calibration mode | |
|
|
Status codes are reset:
•When the conditions causing them are removed
•When the printer is power cycled (turned off and then on)
•For all paper jam conditions, after the jam is cleared, lifting and lowering the printhead.
TTP 2100 Operator Guide | 11/04/2009 |