Installation
Installation Considerations
Design Your Own Mounting
The illustration below gives an example of a
on page 120, and the 3D solid models and outline drawings for CAD that are available on http://www.zebra.com.
Figure 7 • Example of a Simple Shelf for Fastening a Standard Printer Using Quick-Fit Hubs and a Leaf Spring Retainer (Order No. 01473-000)
21
1 0 0 m m | w id th m m | |
in . | p e r 1 0 | |
M | P a + | |
|
|
|
|
|
|
8 m m
1 3 4 m m
11 0 m m
9 0 .8 m m
1 0 m m
4 4 m m
L e a f sp rin g 0 1 4 7 3
In n e r co rn e r o f b e n d
∅6 .5 m m | ∅1 2 m m |
| C e n te r |
1 0 m m | 1 0 m m |
A d d m a te ria l fo r co rn e r ra d iu s | |
Additional space is required for paper loading and paper jam removal. Consider mounting the printer on a movable platform so that the printer can be maintained outside the printer enclosure.
Note • We recommend you to make the output slot 97 mm wide. This way you will be able to use all paper widths that the TTP 2100 series of printers can handle.
11/04/2009 | TTP 2100 Operator Guide |