Axis Communications 225FD Date & Time, Network Basic TCP/IP Settings, IP Address Configuration

Page 31

AXIS 225FD - System Options 31

Date & Time

Current Server Time - displays the current date and time (24h clock). The time can be displayed in 12h clock format in the Overlay Images (see below).

New Server Time - Select your time zone from the drop-down list. If you want the AXIS 225FD clock to automatically adjust for daylight savings time, select the Automatically adjust for daylight saving time changes.

From the Time Mode section, select the preferred method to use for setting the time:

Synchronize with computer time - sets the time from the clock on your computer.

Synchronize with NTP Server - the camera will obtain the time from an NTP server every 60 minutes. Specify the NTP server's IP address or host name.

Set manually - this option allows you to manually set the time and date.

Note: Note that if using a host name for the NTP server, a DNS server must be configured under TCP/IP settings. See Network > TCP/IP below.

Date & Time Format Used in Images - specify the formats for the date and time (12h or 24h) displayed in the Live View video streams.

Use the predefined formats or use your own custom date and time formats. See Advanced File Naming & Date/Time Formats in the online help for information on how to create your own file formats.

Network - Basic TCP/IP Settings

IP Address Configuration

The camera’s IP address can be set automatically via DHCP, or a fixed IP address can be set manually. A host name can be used and there are options for setting up notification of changes in the IP address. DHCP is enabled by default.

Notes: •DHCP is a protocol for automatic IP address assignment on a network. IP address assignment via DHCP may lead to the situation where the IP address changes and you thus lose contact with the unit. To prevent this, configure the options for notification of IP address change (under Ser- vices) to receive notification whenever the IP address for the camera changes.

•Alternatively, if your DHCP server can update a DNS server, you can access the camera by a host name, which is always the same, regardless of the IP address.

Services

Options for notification of IP address change - If the IP Address for the camera is changed automatically, e.g. by DHCP, you can choose to be notified of the change. Click Settings... and enter the required information.

Image 31
Contents Axis 225FD About this Document Contents Axis 225FD Key Features Product FeaturesControl button Serial number S/N OverviewHeater LED IndicatorsPower NetworkAccess From a Browser Accessing the CameraAccessing the camera from the Internet Setting the PasswordSetting the Focus/Zoom Live View Video Stream Types Video StreamsMotion Jpeg MPEG-4 protocols and communication methods How to stream MPEG-4Axis Media Control Other methods of accessing the video streamRTP/RTSP/HTTP or RTP/RTSP/HTTPS Other MPEG-4 clients Accessing the setup tools from a browser Setup ToolsImage Settings Video and Image SettingsImage Appearance Text Overlay Overlay/Mask SettingsVideo Stream TestOverlay image/privacy mask requirements Advanced SettingsCamera Settings Upload and use an overlay/maskMPEG-4 Settings Use custom settings Live View ConfigExample Check Show Custom Link Upload Own Web FilesOwn home User-defined LinksOutput Buttons Default Video FormatDefault Viewer Action ButtonsExternal Video Sequence ModeViewer settings Html ExamplesEvent Servers Event ConfigurationDefinitions Click Add triggered on the Event types Configuring Event TypesHow to set up a triggered event Triggered EventScheduled Event Pre-trigger and Post-trigger buffersMotion Detection Object Size Port StatusViewer System OptionsSecurity IP Address FilteringHttps ReferralsDate & Time Network Basic TCP/IP SettingsIP Address Configuration ServicesDNS Configuration Network Advanced TCP/IP SettingsHost Name Configuration NAT Traversal Link-Local AddressNetwork Traffic Network UPnP Network SocksNetwork Smtp email Network SnmpCOM Port RS485/422 LED SettingsMaintenance SupportAdvanced Resetting to the Factory Default SettingsConfiguration Using the Control ButtonAxis 225FD System Options Unit Connectors Terminal Block Terminal connector block pinoutTerminal connector schematic diagram LED indicatorsPower Connector Block Power connectionsPin Function Schematic Diagram Power Terminal Block and Power Connectors Checking the Firmware TroubleshootingUpgrading the Firmware Symptoms, Possible Causes and Remedial Actions Emergency Recovery ProcedureAxis Support Web browser Your Axis 225FD is accessible locally, but not externallyEtc, to a destination outside the local network Video/image problems MPEG-4 Video/Image problems generalDecode only I frames Browser freezes Status and Network indicator LEDs are flashing red rapidlyProblems uploading files Poor quality snapshot imagesLens Technical SpecificationsMaintenance Accessories Optimizing your system General performance considerationsBandwidth Frame rates Motion Jpeg and MPEG-4Glossary of Terms Axis 225FD Glossary of Terms Axis 225FD Index IndexRtsp
Related manuals
Manual 74 pages 32.82 Kb

225FD specifications

Axis Communications, a pioneer in network video solutions, continues to innovate with the introduction of the Axis 225FD, a cutting-edge fixed dome network camera designed to enhance surveillance capabilities in various environments. This device strives to meet the demanding requirements of modern security by combining advanced imaging technology with user-friendly features.

One of the standout characteristics of the Axis 225FD is its exceptional image quality. It boasts a high-resolution sensor capable of capturing detailed images even in low light conditions. This is further enhanced by Axis' Wide Dynamic Range (WDR) technology, which ensures that both bright and dark areas within a scene are clearly visible. This feature is particularly useful in dynamic lighting situations, such as entryways where bright sunlight may contrast with shaded areas.

The Axis 225FD is equipped with a built-in microphone to capture audio along with video, adding another layer of context to footage. This feature is invaluable for various applications, allowing security personnel to not only see but also hear events as they unfold, leading to more comprehensive situational awareness.

For adaptability, the camera supports PoE (Power over Ethernet), simplifying installation by allowing both power and data transfer through a single cable. This efficiency means less clutter and easier setup, making the Axis 225FD suitable for diverse installation environments, including retail spaces, offices, and public areas.

In terms of security features, the Axis 225FD supports multiple streams, enabling different resolutions for different scenarios. This flexibility ensures that users can tailor the video quality based on their bandwidth constraints while maintaining critical surveillance capabilities. Moreover, the camera is equipped with tampering alarms that send notifications if it is moved or obstructed, further bolstering security measures.

Durability is another critical consideration with the Axis 225FD. Designed to withstand the rigors of various environments, the camera is housed in a robust casing that protects it from dust and moisture, meeting IP66 and IK08 standards. This resilience ensures that the camera remains operational in challenging conditions, providing reliable surveillance year-round.

In summary, the Axis Communications 225FD is a state-of-the-art surveillance solution that excels in key areas such as image quality, audio capture, installation flexibility, and security features. With its durable design and advanced technologies, it stands out as a top choice for organizations looking to enhance their monitoring capabilities and ensure the safety of people and assets.