Axis Communications 225FD user manual LED Settings, Maintenance, Support, COM Port RS485/422

Page 35

AXIS 225FD - System Options 35

The pinout, interface support and the control and monitoring functions provided by this connector are described in Unit Connectors, on page 38.

COM Port RS485/422

The RS-485/422 port can also be configured to allow it to be controlled by TCP/IP applications. The TCP/IP parameters are described in the online help.

LED Settings

The Status indicator LED can be set to flash at a configurable interval (or to not light up at all) whenever the unit is accessed. For a listing of all LED behavior, see page 7, or the online help.

Note: The LED does not flash when the stream is retrieved using MPEG-4 multicast.

Maintenance

Restart - The unit is restarted without changing any of the settings. Use this method if the unit is not behaving as expected.

Restore - The unit is restarted and most current settings are reset to the factory default values. The only settings saved are:

the boot protocol (DHCP or static)

the static IP address

the default router

the subnet mask

the system time

Default - The Default button should be used with caution. Pressing this will return all of the camera's settings, including the IP address, to the factory default values. The camera will then have to be re-installed.

Upgrade Server - See Upgrading the Firmware, on page 43.

Backup - To take a backup of all of the parameters, and any user-defined scripts, click the Backup button. If necessary, it is then possible to return to the previous settings if the settings are changed and there is unexpected behavior.

Restore - click the Browse button to locate the saved backup file (see above) and then click the Restore button. The settings will be restored to the previous configuration.

Note: Backup and Restore can only be used on the same unit running the same firmware. This feature is not intended for the configuration of multiple units or for firmware upgrades.

Support

The support overview page provides valuable information on troubleshooting and contact information, should you require technical assistance.

Image 35
Contents Axis 225FD About this Document Contents Axis 225FD Key Features Product FeaturesControl button Serial number S/N OverviewHeater LED IndicatorsPower NetworkAccess From a Browser Accessing the CameraSetting the Focus/Zoom Setting the PasswordAccessing the camera from the Internet Live View Motion Jpeg Video StreamsVideo Stream Types MPEG-4 protocols and communication methods How to stream MPEG-4RTP/RTSP/HTTP or RTP/RTSP/HTTPS Other methods of accessing the video streamAxis Media Control Other MPEG-4 clients Accessing the setup tools from a browser Setup ToolsImage Appearance Video and Image SettingsImage Settings Text Overlay Overlay/Mask SettingsVideo Stream TestOverlay image/privacy mask requirements Advanced SettingsCamera Settings Upload and use an overlay/maskMPEG-4 Settings Use custom settings Live View ConfigExample Check Show Custom Link Upload Own Web FilesOwn home User-defined LinksOutput Buttons Default Video FormatDefault Viewer Action ButtonsExternal Video Sequence ModeViewer settings Html ExamplesDefinitions Event ConfigurationEvent Servers Click Add triggered on the Event types Configuring Event TypesHow to set up a triggered event Triggered EventScheduled Event Pre-trigger and Post-trigger buffersMotion Detection Object Size Port StatusViewer System OptionsSecurity IP Address FilteringHttps ReferralsDate & Time Network Basic TCP/IP SettingsIP Address Configuration ServicesHost Name Configuration Network Advanced TCP/IP SettingsDNS Configuration Network Traffic Link-Local AddressNAT Traversal Network UPnP Network SocksNetwork Smtp email Network SnmpCOM Port RS485/422 LED SettingsMaintenance SupportAdvanced Resetting to the Factory Default SettingsConfiguration Using the Control ButtonAxis 225FD System Options Unit Connectors Terminal Block Terminal connector block pinoutTerminal connector schematic diagram LED indicatorsPin Function Power connectionsPower Connector Block Schematic Diagram Power Terminal Block and Power Connectors Upgrading the Firmware TroubleshootingChecking the Firmware Axis Support Emergency Recovery ProcedureSymptoms, Possible Causes and Remedial Actions Etc, to a destination outside the local network Your Axis 225FD is accessible locally, but not externallyWeb browser Decode only I frames Video/Image problems generalVideo/image problems MPEG-4 Browser freezes Status and Network indicator LEDs are flashing red rapidlyProblems uploading files Poor quality snapshot imagesLens Technical SpecificationsMaintenance Accessories Optimizing your system General performance considerationsBandwidth Frame rates Motion Jpeg and MPEG-4Glossary of Terms Axis 225FD Glossary of Terms Axis 225FD Index IndexRtsp
Related manuals
Manual 74 pages 32.82 Kb

225FD specifications

Axis Communications, a pioneer in network video solutions, continues to innovate with the introduction of the Axis 225FD, a cutting-edge fixed dome network camera designed to enhance surveillance capabilities in various environments. This device strives to meet the demanding requirements of modern security by combining advanced imaging technology with user-friendly features.

One of the standout characteristics of the Axis 225FD is its exceptional image quality. It boasts a high-resolution sensor capable of capturing detailed images even in low light conditions. This is further enhanced by Axis' Wide Dynamic Range (WDR) technology, which ensures that both bright and dark areas within a scene are clearly visible. This feature is particularly useful in dynamic lighting situations, such as entryways where bright sunlight may contrast with shaded areas.

The Axis 225FD is equipped with a built-in microphone to capture audio along with video, adding another layer of context to footage. This feature is invaluable for various applications, allowing security personnel to not only see but also hear events as they unfold, leading to more comprehensive situational awareness.

For adaptability, the camera supports PoE (Power over Ethernet), simplifying installation by allowing both power and data transfer through a single cable. This efficiency means less clutter and easier setup, making the Axis 225FD suitable for diverse installation environments, including retail spaces, offices, and public areas.

In terms of security features, the Axis 225FD supports multiple streams, enabling different resolutions for different scenarios. This flexibility ensures that users can tailor the video quality based on their bandwidth constraints while maintaining critical surveillance capabilities. Moreover, the camera is equipped with tampering alarms that send notifications if it is moved or obstructed, further bolstering security measures.

Durability is another critical consideration with the Axis 225FD. Designed to withstand the rigors of various environments, the camera is housed in a robust casing that protects it from dust and moisture, meeting IP66 and IK08 standards. This resilience ensures that the camera remains operational in challenging conditions, providing reliable surveillance year-round.

In summary, the Axis Communications 225FD is a state-of-the-art surveillance solution that excels in key areas such as image quality, audio capture, installation flexibility, and security features. With its durable design and advanced technologies, it stands out as a top choice for organizations looking to enhance their monitoring capabilities and ensure the safety of people and assets.