Axis Communications 225FD user manual Status and Network indicator LEDs are flashing red rapidly

Page 47

AXIS 225FD - Troubleshooting 47

 

Poor rendering of MPEG-4 images.

Color depth set incorrectly on clients. Set to 16-bit or 32-bit color.

 

 

If text overlays are blurred, or if there are other rendering problems, you may need to

 

 

enable Advanced Video Rendering. This is done on the MPEG-4 tab in the AMC control

 

 

panel applet.

 

 

Ensure that your graphics card is using the latest device driver. The latest drivers can

 

 

usually be downloaded from the manufacturer's web site.

 

 

If images are degrading, try decreasing the GOV length, see Advanced Settings, on

 

 

page 18.

 

Color saturation is different in MPEG-4

Modify the settings for your graphics adapter. Please see the adapter's documentation

 

and Motion JPEG.

for more information.

The

test image does not display as expected.

 

 

 

 

 

Image settings.

Not all settings have an effect on the test image. For more information, see the help on

 

 

Image Settings.

The

Power indicator is not constantly lit

 

 

 

 

 

Faulty power supply.

Check that you are using an AXIS PS-K power supply.

The

 

Status and Network indicator LEDs are flashing red rapidly

 

 

 

 

Hardware failure.

Contact your Axis dealer.

The

 

Status indicator LED is flashing red and the camera is inaccessible

 

 

 

 

A firmware upgrade has been inter-

See the Emergency Recovery Procedure above.

 

rupted or the firmware has otherwise

 

 

been damaged.

 

Poor quality snapshot images

 

 

 

 

 

Screen incorrectly configured on your

In Display Properties, configure your screen to show at least 65000 colors, i.e. at least

 

workstation.

16-bit. Using only 16 or 256 colors will produce dithering artifacts in the image.

Browser freezes

 

 

 

 

 

Netscape 7.x or Mozilla 1.4 (or later)

Lower the image resolution.

 

can sometimes freeze on a slow com-

 

 

puter.

 

Problems uploading files

 

 

 

 

 

Limited space.

There is only limited space available for the upload of your own files. Try deleting one

 

 

or more existing files, to free up space.

 

Missing images in uploads.

This can occur when trying to use a larger image buffer than is actually available. Try

 

 

lowering the frame rate or the upload period.

Overlay is not displayed

 

 

 

 

 

Incorrect size or location of overlay.

The overlay may have been positioned incorrectly. Refer to the online help for informa-

 

 

tion on the limitations when using image overlays and privacy masks.

Motion Detection triggers unexpectedly

 

 

 

 

 

Changes in luminance.

Motion detection is based upon changes in luminance in the image. This means that if

 

 

there are sudden changes in the lighting, motion detection may be mistakenly trig-

 

 

gered. Lower the sensitivity setting to avoid problems with luminance.

 

 

 

For additional assistance, please contact your reseller or see the support pages on the Axis Website at www.axis.com/techsup

Image 47
Contents Axis 225FD About this Document Contents Axis 225FD Key Features Product FeaturesControl button Serial number S/N OverviewHeater LED IndicatorsPower NetworkAccess From a Browser Accessing the CameraSetting the Focus/Zoom Setting the PasswordAccessing the camera from the Internet Live View Motion Jpeg Video StreamsVideo Stream Types MPEG-4 protocols and communication methods How to stream MPEG-4RTP/RTSP/HTTP or RTP/RTSP/HTTPS Other methods of accessing the video streamAxis Media Control Other MPEG-4 clients Accessing the setup tools from a browser Setup ToolsImage Appearance Video and Image SettingsImage Settings Text Overlay Overlay/Mask SettingsVideo Stream TestOverlay image/privacy mask requirements Advanced SettingsCamera Settings Upload and use an overlay/maskMPEG-4 Settings Use custom settings Live View ConfigExample Check Show Custom Link Upload Own Web FilesOwn home User-defined LinksOutput Buttons Default Video FormatDefault Viewer Action ButtonsExternal Video Sequence ModeViewer settings Html ExamplesDefinitions Event ConfigurationEvent Servers Click Add triggered on the Event types Configuring Event TypesHow to set up a triggered event Triggered EventScheduled Event Pre-trigger and Post-trigger buffersMotion Detection Object Size Port StatusViewer System OptionsSecurity IP Address FilteringHttps ReferralsDate & Time Network Basic TCP/IP SettingsIP Address Configuration ServicesHost Name Configuration Network Advanced TCP/IP SettingsDNS Configuration Network Traffic Link-Local AddressNAT Traversal Network UPnP Network SocksNetwork Smtp email Network SnmpCOM Port RS485/422 LED SettingsMaintenance SupportAdvanced Resetting to the Factory Default SettingsConfiguration Using the Control ButtonAxis 225FD System Options Unit Connectors Terminal Block Terminal connector block pinoutTerminal connector schematic diagram LED indicatorsPin Function Power connectionsPower Connector Block Schematic Diagram Power Terminal Block and Power Connectors Upgrading the Firmware TroubleshootingChecking the Firmware Axis Support Emergency Recovery ProcedureSymptoms, Possible Causes and Remedial Actions Etc, to a destination outside the local network Your Axis 225FD is accessible locally, but not externallyWeb browser Decode only I frames Video/Image problems generalVideo/image problems MPEG-4 Browser freezes Status and Network indicator LEDs are flashing red rapidlyProblems uploading files Poor quality snapshot imagesLens Technical SpecificationsMaintenance Accessories Optimizing your system General performance considerationsBandwidth Frame rates Motion Jpeg and MPEG-4Glossary of Terms Axis 225FD Glossary of Terms Axis 225FD Index IndexRtsp
Related manuals
Manual 74 pages 32.82 Kb

225FD specifications

Axis Communications, a pioneer in network video solutions, continues to innovate with the introduction of the Axis 225FD, a cutting-edge fixed dome network camera designed to enhance surveillance capabilities in various environments. This device strives to meet the demanding requirements of modern security by combining advanced imaging technology with user-friendly features.

One of the standout characteristics of the Axis 225FD is its exceptional image quality. It boasts a high-resolution sensor capable of capturing detailed images even in low light conditions. This is further enhanced by Axis' Wide Dynamic Range (WDR) technology, which ensures that both bright and dark areas within a scene are clearly visible. This feature is particularly useful in dynamic lighting situations, such as entryways where bright sunlight may contrast with shaded areas.

The Axis 225FD is equipped with a built-in microphone to capture audio along with video, adding another layer of context to footage. This feature is invaluable for various applications, allowing security personnel to not only see but also hear events as they unfold, leading to more comprehensive situational awareness.

For adaptability, the camera supports PoE (Power over Ethernet), simplifying installation by allowing both power and data transfer through a single cable. This efficiency means less clutter and easier setup, making the Axis 225FD suitable for diverse installation environments, including retail spaces, offices, and public areas.

In terms of security features, the Axis 225FD supports multiple streams, enabling different resolutions for different scenarios. This flexibility ensures that users can tailor the video quality based on their bandwidth constraints while maintaining critical surveillance capabilities. Moreover, the camera is equipped with tampering alarms that send notifications if it is moved or obstructed, further bolstering security measures.

Durability is another critical consideration with the Axis 225FD. Designed to withstand the rigors of various environments, the camera is housed in a robust casing that protects it from dust and moisture, meeting IP66 and IK08 standards. This resilience ensures that the camera remains operational in challenging conditions, providing reliable surveillance year-round.

In summary, the Axis Communications 225FD is a state-of-the-art surveillance solution that excels in key areas such as image quality, audio capture, installation flexibility, and security features. With its durable design and advanced technologies, it stands out as a top choice for organizations looking to enhance their monitoring capabilities and ensure the safety of people and assets.