Airlink SkyIPCam310 View Image ActiveX Mode, Reboot, Factory Reset, LED Control, Update Firmware

Page 33

Reboot

Do you really want to reboot this device? Click YES from this option, and you can restart the camera just like turning the device off and on and saved settings are retained.

Factory Reset

Do you really want to factory reset this device? Click YES from this option, and you can resume all factory default settings for the camera.

NOTE: You have to configure the network settings again after a Factory Reset.

LED Control

The LED control allows user to setup the LED illumination as desired. This feature provides the flexibility when surveillance activity is ON. There are three options: Normal, ON, and OFF.

Update Firmware

This option allows you to update the firmware of the camera once you obtained a latest version of firmware. Click Browse to find the firmware file saved in your computer, and then click Update.

NOTE: It will take a few minutes to update firmware. Please wait to complete the procedure; you can then reboot the camera.

Once the configuration is completed, click Home to return to the Welcome screen and select the desired View Video option either through ActiveX Mode or Java Mode as described in the next section.

Then, position the camera to the desired location appropriately for your purpose. Followed by adjustment of the camera focus, done manually by turning the lens clockwise or anti-clockwise to the desire image quality. Please refer to Appendix E for detailed instruction.

5.3 View Image – ActiveX Mode

To view video images from the browser, click View Image -ActiveX Mode from the Welcome screen to access the video images from Internet Explorer as illustrated below:

32

Image 33
Contents User’s Manual Table of Contents About This Guide Introduction Features and BenefitsUnpacking the Package Remote UtilityBroad Range of Applications Physical Description System RequirementsReset Button Network Cable ConnectorO Connector DC Power ConnectorScrew Hole Top/Bottom PanelConnecting the Ethernet cable Hardware InstallationAttaching the Power Supply Attaching the Camera to the StandInstalling the Setup Wizard Setting up the CameraPage Using the Setup Wizard Page Page Viewing Images Page Page Security Application of the SkyIPCam310 Soho Applications Diagram Home Applications DiagramWeb Configuration Utility Using the CameraSystem System AdministrationCamera Name LocationVideo/Audio Date & TimeEnvironment Video ResolutionLight Frequency Compression RateNetwork DNS IP Address IP AssignmentDynamic DNS Http portAdministrator Add UserDelete User Trigger Output Enable Trigger EmailAccess Control UploadFTP Server RS485 OperationPort setting Model InformationFirmware Version MAC AddressReboot View Image ActiveX ModeFactory Reset Update FirmwarePage View Image Java Mode Page IPView Pro InstallationPage Click Finish to complete the installation Getting Started Item FeatureRecord, or Motion Record Adding a Camera Using IPView ProRemoving a Camera Recording Video Viewing a CameraPlaying Recorded Video Configuring the SystemMotion Configuration-1 Camera ConfigurationDetect Region Motion Configuration-2Tools Proxy Server Mailing ConfigurationRecording Configuration Schedule-Recording Configuration Others Account Log ListAbout SkyIPCam310 Features Frequently Asked QuestionsSkyIPCam310 Installation AppendixPing Your IP Address TroubleshootingPage Adjust SkyIPCam310 Focus I/O Terminal Application Connector Pin AssignmentPTZ Camera Image Video Setting Hardware InterfaceSoftware Operating environment Mailsupport@airlink101.com Technical Support