TANDBERG 1000/550 for Cisco CallManager | Installation |
|
|
Power Cable
•Connect the power supply to the ‘DC in’ input on the system.
•Connect the power cable to the power supply.
•Connect the power cable to an electrical distribution socket.
LAN Cable
• To use the system on LAN, connect a LAN cable from the ‘Ethernet’ connector on the system to your LAN.
Wireless LAN - Insert PC Card
•Remove the “dummy” card by pressing the ‘Eject’ button next to the slot.
•Insert the Wireless LAN PC Card.
NOTE
MAKE SURE YOU INSERT THE CARD IN THE RIGHT DIRECTION (WITH THE PRODUCT LOGO POINTING UPWARDS). PUSH THE CARD INTO THE SLOT UNTIL THE ‘EJECT’ BUTTON POPS UP.
See ‘Wireless LAN Settings’ for configuration.
13