TANDBERG 1000, 550 user manual

Page 26

Advanced Use

TANDBERG 1000/550 for CiscoCallManager

IP-address

IP-address defines the network address of the codec. This address is only used in static mode. In DHCP-mode, the assigned IP-address can be found on the View Status menu

IP-subnet mask

IP-subnet mask defines the type of network. This address is only used in static mode. Your system administrator will provide the correct value for this field.

Gateway

When using DHCP, the default gateway will be set automatically. If the LAN utilizes static IP addresses, IP address, subnet mask, and default gateway must be specified by the LAN administrator.

Ethernet Speed

Auto

The codec will auto-detect the speed/duplex on the LAN.

10/Half

The codec will connect to the LAN using 10Mbps speed/Half Duplex.

10/Full

10 Mbps speed/Full Duplex.

100/Half

100 Mbps speed/Half Duplex.

100/Full

100 Mbps speed/Full Duplex.

Restart

 

Pressing the Restart softbutton will restart your system. If IP-assignment is changed, it is sufficient to use this softbutton to restart the system.

26

Image 26
Contents Tandberg For Cisco CallManagerTrademarks and copyright Operator Safety Summary Equipment MarkingsContents Main Menu On Screen SymbolsDirectory Settings Placing a Call Answering a Call Ending a CallT550 for Cisco CallManager Peripheral Equipment Appendix 1 IP Password Appendix 2 Declaration of ConformityT1000 for Cisco CallManager Peripheral Equipment Introduction Menu structure Main MenuConnecting Your Tandberg 1000 for Cisco CallManager System InstallationPrecautions LAN Cable Power CableWireless LAN Insert PC Card Connecting Your Tandberg 550 for Cisco CallManager System Scart Europe Microphone CableMonitor Cables Scart Europe & RCA/S-Video USPower Cable Before You Begin Standby ModeGetting Started Welcome ScreenCamera control and menu navigation keys Remote ControlQuick keys Dialing keysAnswering a Call Handling CallsPlacing a Call Ending a CallView Outgoing Video Selfview Adjusting VolumeGeneral Use Microphone on/offMoving / zooming Camera On Screen SymbolsControlling the Camera Advanced Use Main MenuResuming a Call on Hold CallsPlacing a Call on Hold Transferring a Call to Another ExtensionRedialing the Last Number Dialled ServicesDirectory Settings View Status TIP Tftp DNS Network Settings Page Recommended access point Required cardsPage Audio Settings Video SettingsData Port Settings MessagesPC-interface serial cable Peripheral EquipmentT1000 for Cisco CallManager Peripheral Equipment Headset InterfaceT550 for Cisco CallManager Peripheral Equipment Kensington LockAppendix 1 IP Password AppendicesAppendix 2 Declaration of Conformity Tandberg 1000/550 for Cisco CallManager Appendices Index
Related manuals
Manual 2 pages 27.8 Kb