TANDBERG 550 Remote Control, Quick keys, Camera control and menu navigation keys, Dialing keys

TANDBERG 1000/550 for Cisco CallManager Getting Started

Remote Control

The remote control is used to handle calls and to navigate the graphical user interface.

Quick keys

The three buttons on top of the remote control refer to the blocks at the bottom of the screen. The text inside the blocks will change depending on which menu is selected and the state of the call. The three Quick keys have different colors.

Camera control and menu navigation keys

Frequently used keys allowing you to control your own camera and the far end camera, control your volume, select and move self-view, switch your microphone off and navigate in the menu system.

Dialing keys

Used to make a call. The twelve number keys, (0-9), #, * operate in the same way as on a modern push-button telephone. These buttons are also used when entering a name into a text field.

On the T1000 for Cisco CallManager only	Push-button
	The push-button in front of the system
	works as the CONNECT button during
	an incoming call.
	When in a call, the button toggles the
	speaker on/off.
	When the speaker is off, the audio is
	available on the headset output,
	marked ‘Headset’, on the back of the
	system.

15