TANDBERG 1000/550 for Cisco CallManager | Advanced Use |
Wireless LAN Settings
SSID (Service Set Identification)
Example “WLANNETWORK”. Defines a local network id for this wireless region. It must be the same for all end points and the access point. An endpoint will find the access point if the SSID is correct, however, if the encryption key is faulty, it will not transmit any data.
Community (optional)
Community can be used when connecting to an access point where the SSID is the same. Example “Unit2”.
WLAN Mode |
|
AdHoc: | Used when not communicating with an access point. |
Managed: | Used when communication is made through an access point. |
Restart
Make sure the corresponding settings are programmed into the access point. Press Restart to activate the settings.
Required cards
•Compaq WL110 11 Mbps Wireless LAN
•Lucent Orinoco 11 Mbit/s SILVER
•Lucent Orinoco 11 Mbit/s GOLD
•Cisco Aironet 350 series
•Enterasys Networks RoamAbout 802.11 DS High Rate
•Melco Buffalo
Recommended access point
• Compaq WL410 base station
NOTE
THE PC
27