Hawking Technology HNC720G manual Frequently Asked Questions FAQ

Page 45

B. Frequently Asked Questions (FAQ)

Q What if I forget my password?

A After the Administrator's password has been assigned, all access to the network camera needs authentication. If you are one of the managed users, you have to ask the Administrator for the password. If you are the Administrator, there is no way to recover the root password except by restoring the factory default settings. Refer to Appendix A for the procedures.

Q Why can I not watch video from the network camera after it is authenticated?

A There are many possible scenarios regarding this problem:

1.If you have just installed the network camera and are unable to watch the video, check if the heartbeat LED is blinking or the lens cap is off. If the heartbeat LED is dim, perform the software installation again.

2.If the network camera is well installed and you are accessing it for the first time using Internet Explorer, adjust the security level of Internet Explorer to allow installation of plug-ins.

3.If the problem still exists after adjusting, and the message over the image window is showing "connecting", the network traffic may be too crowded.

Q What is the plug-in for?

A The plug-in provided by the network camera is used to display motion pictures and audio in Internet Explorer. If your system does not allow installation of any plug-in software, the security level of the web browser may need to be lowered. It is recommended that you consult the network supervisors in your office regarding adjustment of the security level. Software installation may be regulated in some offices.

Q Why is the timestamp different from the system time of my PC or notebook?

AThe timestamp is based on the system time of the network camera. It is maintained by a real-time clock inside and can be automatically synchronized with the time-server if the network camera is connected to the Internet and the function is enabled. Differences of several hours may result from the time zone setting.

Q Can I install it on ceiling?

A Yes. There are flip and mirror options in the video configuration page to correct the images for upside down installation.

Q The image is not clear enough.

A Rotate the lens to adjust the focus after the network camera has been installed in the proper position. The image settings and white balance can be fine tuned to achieve the best visual effect. Also notice that the power line frequency must match the local utility to synchronize and minimize the effect of flickering fluorescent lights.

Q Why does the image not refresh regularly?

A Some anti-virus programs filter the received web content. It takes time to perform data examination and affect streaming applications such as that of the network camera. However, it only affects the HTP mode of the network camera. If the network allows only HTTP mode, disable the web filtering function of the anti-virus program temporarily. During this period, the User should be aware of the risk of malicious network activity.

Q I have opened motion detection windows but they will not work.

A If the motion detection windows are set up and names are given, check to see if the function is checked on the first line. While it is enabled, adjust the sensitivity and percentage to monitor the level indicator for best results.

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Page Hawking Limited Warranty Initial Access to the Camera Before Using This Product Package Contents InstallationHow to Use This Camera Main Screen with Camera View Client SettingsAppendix Page Unpack and Inspect Wireless LAN Installation Ethernet InstallationDI+ Software Installation Page Page Add a Password for Security Authentication Installing the Plug-in Main Screen with Camera View Primary User’s CapabilitiesConfiguration Client SettingsDisable Digital Zoom Digital OutputAuto Pan or Pan Tilt SpeedAuto Patrol or Patrol StopClient Settings URL http//Network Camera/protocol.html Administrator’s Capabilities Configure for Optimal PerformanceFor Best Real-time Video Images Opening Accounts for New Users Demo on multiple sites mid-scale service Product demo for e-business Large-scale ServiceBuilding a Multimedia Web Attraction Site Page Building a Security Application Send snapshots when motion is detected Software Revision Upgrade Definitions in Configuration System Parameters User Group Administration Wlan Configuration Network settingsGeneral StreamingPage Smtp Page Video Codec Parameters Audio ParametersPage Motion Detection Weekly Schedule Application SetupEvent operation Sequential operationPage Preset function area Camera ControlCamera control area UPnP and Ddns Settings Page Remote Controller Viewing System LogViewing System Parameters Factory default Reset and Restore TroubleshootingStatus LED Condition LED ColorFrequently Asked Questions FAQ Page Restore factory default settings Capture update Snapshot of Jpeg imageQuery status of the digital input Drive the digital outputHomepage name Referenced URL URLSystem resource URL Resource name Referenced URLSystem configuration URL General format of command URLNetwork configuration URL Security configuration URLWlan Ssid Page Ddns & UPnP configuration URL Mail&FTP Configuration URL Audio/Video configuration URL Image quality configuration URL Normal imageCamera control URL Application configuration URL How to View Your Camera via the Internet Page Save/Cancel Page Page Page Camera Specification Technical Specifications SystemNetworking VideoDimension LED indicatorWeight Power
Top Page Image Contents