Q I cannot hear any sound while watching.
A If there is "V_ONLY" shown above the image, click on connection type to uncheck "Disable audio". If there is "V" shown instead of "AV", the sound card in your PC may not have been properly installed. If "AV" is shown, check the audio source of the network camera, and make sure of whether you are using an internal or external microphone.
Q How many users are allowed to watch the network camera at the same time?
A Too many users requesting the
Q How fast is the video rate of the network camera?
A The
1.Network throughput
2.Bandwidth sharing
3.Number of users
4.The complicated/detailed objects and movement in view
5.The power of your PC or notebook computer that is responsible for displaying images.
On average, the transfer rate in a general local network environment can reach over 200 kilobytes per second and approximately 10 to 20 pictures per second from a regular environment.
Q How can I keep the network camera as private as possible?
A The network camera is designed for surveillance purposes and has many flexible interfaces. The user authentication and special confirmation in installation can keep the network camera from unauthorized access. You may also change the HTTP port to a
Q Why can I not access the network camera when I set up some options in the application?
A Any incorrect network settings will make the network camera inaccessible. If this happens, restore the factory default settings following the procedures in Appendix A.
46