Motion Detection
Enable motion detection: Check this option to turn on motion detection.
Click on this 
button to add a new window. At most, three windows can exist simultaneously. Use the mouse to click, hold, and drag the window frame to resize it, or the title bar to move it. Clicking on the ‘x’ at the upper
Click on this 
button to save the related window settings. A graphic bar will rise or fall depending on the image’s motion variations. A green bar means the image variation is under the monitoring level threshold and a red bar means the image variation is over the monitoring level threshold. When the bar goes red, the motion detection window will also be outlined in red. Going back to the homepage, the monitoring window is hidden, but the red frame will show when motion is detected.
Window Name: The text will show at the top of the window.
Sensitivity: This sets the allowable difference between two sequential images. Higher ”Sensitivity” will help to detect even the slightest amount of motion.
Percentage: This sets the space ratio of moving objects in the monitoring window. Higher “Percentage” discriminates smaller objects. The higher the percentage, the more difficult it will be to detect small moving objects. (Therefore, by increasing the percentage, you will be able to exclude minor, unnecessary motions, if desired.)
A higher sensitivity and smaller percentage will allow easier motion detection. The following figure shows the screen
when 
is clicked.
36