Hawking Technology HNC720G manual How to View Your Camera via the Internet

Page 58

D. How to View Your Camera via the Internet

The steps outlined below will help you install your camera behind a router:

1.Camera Identification

Open the camera’s web page by typing its IP address in your web browser, and click on “System”. If you intend to install multiple cameras, it is recommended that you give each camera a unique “Host name” in the field provided.

2.Ensure that the Camera Has a Local IP Address

You will need a local IP address to install the camera and to be able to view it within the local area network (LAN). If you have already installed the camera, then you will have already obtained a local IP address via the IP Setup program or web browser. You can go back to the IP Setup program or the camera’s web page at any time to change the camera’s IP address. On the camera’s web page, you can set the IP address under the heading “IP Address” in the “Network” section. The camera settings must correspond with your network’s existing settings. Please note that the “Default Router” is your router’s local IP Address.

58

Image 58

Contents Page Hawking Limited Warranty How to Use This Camera Before Using This Product Package Contents InstallationInitial Access to the Camera Main Screen with Camera View Client SettingsAppendix Page Unpack and Inspect Ethernet Installation Wireless LAN InstallationDI+ Software Installation Page Page Add a Password for Security Authentication Installing the Plug-in Primary User’s Capabilities Main Screen with Camera ViewDisable Digital Zoom Client SettingsConfiguration Digital OutputAuto Patrol or Patrol Tilt SpeedAuto Pan or Pan StopClient Settings URL http//Network Camera/protocol.html Configure for Optimal Performance Administrator’s CapabilitiesFor Best Real-time Video Images Opening Accounts for New Users Product demo for e-business Large-scale Service Demo on multiple sites mid-scale serviceBuilding a Multimedia Web Attraction Site Page Building a Security Application Send snapshots when motion is detected Software Revision Upgrade Definitions in Configuration System Parameters User Group Administration General Network settingsWlan Configuration StreamingPage Smtp Page Audio Parameters Video Codec ParametersPage Motion Detection Event operation Application SetupWeekly Schedule Sequential operationPage Camera Control Preset function areaCamera control area UPnP and Ddns Settings Page Viewing System Log Remote ControllerViewing System Parameters Factory default Status LED TroubleshootingReset and Restore Condition LED ColorFrequently Asked Questions FAQ Page Query status of the digital input Capture update Snapshot of Jpeg imageRestore factory default settings Drive the digital outputSystem resource URL URLHomepage name Referenced URL Resource name Referenced URLGeneral format of command URL System configuration URLSecurity configuration URL Network configuration URLWlan Ssid Page Ddns & UPnP configuration URL Mail&FTP Configuration URL Audio/Video configuration URL Normal image Image quality configuration URLCamera control URL Application configuration URL How to View Your Camera via the Internet Page Save/Cancel Page Page Page Networking Technical Specifications SystemCamera Specification VideoWeight LED indicatorDimension Power