Vivotek IP7133 (WIRED) manual Http

Page 26

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

5. Click Next in the following window.

6. Click Finish. UPnPTM is enabled.

►How does UPnPTM work?

UPnPTM networking technology provides automatic IP configuration and dynamic discovery of devices added to a network. Services and capabilities offered by networked devices, such as printing and file sharing, are available among each other without bothersome network configuration. In the case of Network Cameras, you will see Network Camera shortcuts at My Network Places.

►Enabling UPnP port forwarding allows the Network Camera to open secondary HTTP port on the router, not HTTP port, meaning that you have to add the secondary HTTP port number behind the

Network Camera’s public address in order to access the Network Camera from the Internet. For example, when the HTTP port is set to 80 and the secondary HTTP port is set to 8080, refer to the list below for the Network Camera’s IP address.

From the Internet

In LAN

http://203.67.124.123:8080

http://192.168.4.160 or

 

http://192.168.4.160:8080

►If the PPPoE settings are incorrectly configured or the Internet access is not working, restore the

Network Camera to factory default; please refer to Restore on page 52 for details. After the Network Camera is reset to factory default, it is accessible in LAN.

HTTP

Authentication: Depending on your network security requirements, the Network Camera provides two

types of security settings for a HTTP transaction: basic and digest. If basic authentication is selected, the password is sent in plain text format; there can be potential risks of being intercepted. If digest authentication is selected, user credentials are encrypted in MD5 algorithm and thus provide better protection against unauthorized accesses.

HTTP port / Secondary HTTP port: By default, the HTTP port is set to 80 and the secondary HTTP port is set to 8080. Also, they can be assigned with another port number between 1025 and 65535. If the ports are incorrectly assigned, the following warning messages are displayed:

26 - User's Manual

Page 25 Page 27
Image 26
Page 25 Page 27
Contents IP Surveillance Table of Contents Package contents Read before useConnectors Physical descriptionDI/DO Diagram Hardware Reset Installation Network deploymentInternet connection with static IP Software installation Accessing the Network Camera Using web browsersPage Using Rtsp players Using 3GPP-compatible mobile devices MPEG-4Using Vivotek recording software Main Live Video Window Video title Title and time Client Settings MP4 Saving Options System Time SystemSystem DI and do Add User Root PasswordSecurity Manage User Network Network TypePPPoE Point-to-point over Ethernet Page Http FTP Rtsp Streaming Page Wireless LAN IP7134 only Page Page Ddns Dynamic domain name service DdnsCustomSafe100 Delete allowed list / Delete denied list Access listAllowed list / Denied list Video settings Audio and videoImage Settings Privacy mask Page Audio settings To enable motion detection, follow the steps below Motion detectionPercentage = 30% Media Settings ApplicationSnapshot20080104100341 Server Settings Page Page Event Settings Delete Current Log System logRemote Log View parameters Restore MaintenanceReboot Upload / Export Daylight Saving Time Configuration File Upgrade Firmware IP7133 URL Commands of the Network Camera AppendixGet Server Parameter Values General CGI URL Syntax and ParametersSecurity Level Security Level SUB-DIRECTORY DescriptionParameter pair Set Server Parameter Values Parameter Value DescriptionAvailable parameters on the server Valid Values DescriptionName Value Security Description GMT 0630 Rangoon GMT 0700 Bangkok, Hanoi, Jakarta MODEL-BRAND-VERSION Group security Name Value Security DescriptionSubgroup of network rtsp OPEN, Shared HEX, AsciiAES, Tkip Group ipfilterVGA Cmos = 4CIF QcifCIF Cmos JpegGroup imagepreview TZO DHSLogalert LoginfoLogemerg LogcritPage Mjpeg Parameter Value Security Description One bit represents one digital input. The LSB Actiondoi0~ndo-1 Enable or disable trigger digital output Drive the Digital Output Query Status of the Digital Input Query Status of the Digital Output Do0=state\r\n Do1=state\r\n Do2=state\r\n Do3=state\r\nAccount Management Parameter Value Default DescriptionCapture Single Snapshot System Logs Upgrade Firmware System InformationIP Filtering Value DescriptionGet SDP of Streams Open the Network StreamTechnical Specifications ．AGC, AWB, AESTechnology License Notice Electromagnetic Compatibility EMC Liability
Top Page Image Contents